Tyan B8026T70AV18E8HR Barebone 2U AMD EPYC 1S 2TB 8xNVMe 18×2.5 SATA Storage Server

Key Features

  • Single AMD EPYC CPU Socket
  • Support for 8, 16, 24, and 32 core EPYC 7001/7002 processors
  • (16) DIMM slots supporting up to 2TB DDR4 RAM
  • (16) Front Hot-Swap 2.5″ SATA 6G Drive Bays
  • (8) Front Hot-Swap 2.5″ NVMe Drive Bays
  • (2) Rear Hot-Swap 2.5″ SATA Drive Bays
  • Up to 6 PCIe slots + OCP v2.0 LAN Mezzanine
  • AST2500 BMC with Redfish support
  • Manufacturer Part Number: B8026T70AV18E8HR

Supermicro AS -1114S-WN10RT AMD EPYC 7002 1S 10×2.5 NVMe 4TB ECC 2x10GbE Virtualization Cloud Hosting Low Latency Storage Server

AS -1114S-WN10RT

Supermicro AS -1114S-WN10RT Technical Specifications

The Supermicro SuperServer AS -1114S-WN10RT AMD EPYC NVMe server is a high performance low latency server suitable for virtualization, cloud and enterprise infrasructure applications.

Specifications 
Product SKUs
AS -1114S-WN10RT
  • A+ Server 1114S-WN10RT (Black)
Motherboard
Super H12SSW-NTR
Processor/Cache
CPU
  • Single AMD EPYC™ 7002 Series Processor
  • Socket SP3
  • Support CPU TDP up to 280W
Cores
  • Up to 64 Cores
System Memory
Memory Capacity
  • 16 DIMM slots
  • Up to 4TB 3DS ECC DDR4-3200MHz RDIMM/LRDIMM
Memory Type
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
On-Board Devices
Chipset
  • System on Chip
SATA
  • SATA3 (6Gbps)
Network Controllers
  • Dual 10GBase-T LAN with via Broadcom BCM57416
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • ASPEED AST2500 BMC
Input / Output
SATA
  • 2 SATA3 (6 Gbps) ports
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 7 USB 3.0 ports (4 rear, 2 front, 1 Type A)
Video
  • 1 VGA port
DOM
  • 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
Power Configurations
  • ACPI / APM Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-116TS-R706WBP5-N10
Dimensions and Weight
Width
  • 17.2″ (437mm)
Height
  • 1.7″ (43mm)
Depth
  • 23.5″ (597mm)
Weight
  • Net Weight: 25 lbs (11.34 kg)
  • Gross Weight: 39 lbs (17.69 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots
PCI-Express
  • 2 PCI-E 4.0 x16 (FHHL) slots
  • 1 PCI-E 4.0* x16 (LP) slot
  • 2 PCI-E / SATA 3.0 x2 NVMe M.2 slots
  • * Limited Support: On some PCI-E 4.0 devices, it will only run at PCI-E 3.0 speed.
Drive Bays
Hot-swap
  • 10 Hot-swap U.2 NVMe drive support
  • Optional 10 SATA3 drive support via additional SATA cables
Backplane
Supports 10 NVMe or 10 SATA3
System Cooling
Fans
  • 6 heavy duty fans with Optimal Fan Speed Control
AC/DC240V Input Redundant Power Supply
700W/750W Redundant Power Supplies with PMBus
Total Output Power
  • 700W: 100 – 140Vac
  • 750W: 200 – 240Vac
  • 750W: 200 – 240Vdc (for CCC only)
Dimension
(W x H x L)
  • 54.5 x 40.25 x 320 mm
Input
  • 100 – 140Vac / 8 – 6A / 50-60Hz
  • 200 – 240Vac / 4.5 – 3.8A / 50-60Hz
  • 200 – 240Vdc / 4.5 – 3.8A (CCC Only)
+12V
  • Max: 58A / Min: 0.5A (100 – 140Vac)
  • Max: 62A / Min: 0.5A (200 – 240Vac)
  • Max: 62A / Min: 0.5A (200 – 240Vdc)
    (CB/CCC Only)
+5V sb
  • Max: 3A / Min: 0A
Output Type
  • Gold Finger Connector Mating with Molex 45984-4343
Certification Platinum Level Certified
Platinum Certified
Test Report ]
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

Supermicro AS -2123US-TN24R25M AMD EPYC 7001/7002 2S 24×2.5 NVMe 8TB ECC 2x25G SFP28 Virtualization Cloud Hosting Low Latency Storage Server

AS -2123US-TN24R25M

Supermicro AS -2123US-TN24R25M Technical Specifications

The Supermicro SuperServer AS -2123US-TN24R25M AMD EPYC NVMe server is a high performance low latency server suitable for virtualization, cloud and enterprise infrasructure applications.

Product SKUs
AS -2123US-TN24R25M
  • A+ Server 2123US-TN24R25M
Motherboard
H11DSU-iN
Processor/Chipset
CPU
  • Dual AMD EPYC™ 7001/7002* series Processors
    (* Board revision 2.x required)
  • Socket SP3
  • Supports CPU TDP 225W / cTDP up to 240W*
Cores
  • Up to 32 Cores (Board revision 1.x + 7001 Processors)
  • Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
  • System on Chip (SoC)
System Memory
Memory Capacity
  • 32 DIMM slots
  • Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
  • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs (7001 Processors)
  • DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
    (* Board revision 2.x required + 7002 Processors)
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Connectivity
  • Dual 25GbE SFP28 ports via AOC-2UR68-M2TS-O (Mellanox ConnectX-4 Lx EN)
VGA
  • ASPEED AST2500 BMC
Expansion Slots
2U
  • No expansion slot available.*
Input / Output
NVMe
  • 24 U.2 NVMe support
LAN
  • Dual 25G SFP28 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 3 USB 3.0 ports (2 rear + 1 Type A)
VGA
  • 2 VGA ports (1 rear, 1 onboard)
Others
  • 1 COM port
  • 2 SATA DOM power connectors
  • TPM 2.0 header
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
* Please refer to the system manual for more information.
Chassis
Form Factor
  • 2U
Model
  • CSE-219U2TS-R1K62P
Dimensions
Height
  • 3.5″ (89mm)
Width
  • 17.2″ (437mm)
Depth
  • 28.46″ (723mm)
Weight
  • Net Weight: 39 lbs (17.7 kg)
  • Gross Weight: 63 lbs (28.6 kg)
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Drive Bays
Hot-swap
  • 24 hot-swap 2.5″ U.2 NVMe drive bays
System Cooling
Fans
  • 4 heavy-duty PWM fans with optimal fan speed control
Air Shroud
  • 1 Air Shroud
Power Supply
1600W Redundant Power Supplies with PMBus
Total Output Power
  • 1600W/1000W
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 13 – 9A / 50-60Hz
  • 200-240Vac / 10 – 8A / 50-60Hz
+12V
  • Max: 83.3A / Min: 0A (100-127Vac)
  • Max: 133A / Min: 0A (200-240Vac)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%Titanium Level
Test Report ]
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 4x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

Supermicro AS -1123US-TN10RT AMD EPYC 7001/7002 2S 10×2.5 NVMe 8TB ECC 2x10GbE Virtualization Cloud Hosting Low Latency Storage Server

AS -1123US-TN10RT

Supermicro AS -1123US-TN10RT Technical Specifications

The Supermicro SuperServer AS -1123US-TN10RT AMD EPYC NVMe server is a high performance low latency server suitable for virtualization, cloud and enterprise infrasructure applications.

Specifications 
Product SKUs
AS -1123US-TN10RT
  • A+ Server 1123US-TN10RT
Motherboard
H11DSU-iN
Processor/Chipset
CPU
  • Dual AMD EPYC™ 7001/7002* series Processors
    (* Board revision 2.x required)
  • Socket SP3
  • Supports CPU TDP 225W / cTDP up to 240W*
Cores
  • Up to 32 Cores (Board revision 1.x + 7001 Processors)
  • Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
  • System on Chip (SoC)
System Memory
Memory Capacity
  • 32 DIMM slots
  • Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
  • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs (7001 Processors)
  • DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
    (* Board revision 2.x required + 7002 Processors)
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • Intel® X540 Controller
VGA
  • ASPEED AST2500 BMC
Expansion Slots
1U
  • 1 PCI-E 3.0 x16 (FH, 9.5″L) slot
  • 1 PCI-E 3.0 x8 (LP) slot

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

M.2
  • 1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110)
  • or 1 M.2 M-Key SATA3 via optional cable CBL-SAST-0639 (2240/2260/2280/22110)
  • or 2 Internal M.2 slots via optional cable CBL-SAST-0639 (NVMe 2260 + SATA 2260)
Input / Output
NVMe
  • 10 U.2 NVMe support
LAN
  • 2x 10GbBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 5 USB 3.0 ports (2 rear + 2 front + 1 Type A)
VGA
  • 2 VGA ports (1 rear, 1 onboard)
Others
  • 1 COM port
  • 2 SATA DOM power connectors
  • TPM 1.2 header
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
Chassis
Form Factor
  • 1U
Model
  • CSE-119UTS-R1K02P-N10T
Dimensions
Height
  • 1.7″ (43mm)
Width
  • 17.2″ (437mm)
Depth
  • 27.82″ (707mm)
Weight
  • Net Weight: 26 lbs (11.8 kg)
  • Gross Weight: 41 lbs (18.6 kg)
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Drive Bays
Hot-swap
  • 10 hot-swap 2.5″ U.2 NVMe drive bays
System Cooling
Fans
  • 8 heavy-duty PWM fans with optimal fan speed control
Air Shroud
  • 1 Air Shroud
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power
  • 800W/1000W
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 – 7A / 50-60Hz
  • 200-240Vac / 7 – 5A / 50-60Hz
  • 200-240Vdc / 7 – 5A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 83A / Min: 0A (200-240Vac)
  • Max: 83A / Min: 0A (200-240Vdc)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%Titanium Level
Test Report ]
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

Supermicro AS -1024US-TRT AMD EPYC 7002 2S 4×2.5 SATA3/Optional NVMe 8TB ECC 2x10GbE Virtualization Cloud Hosting Low Latency Storage Server

AS -1024US-TRT

Supermicro AS -1024US-TRT Technical Specifications

The Supermicro SuperServer AS -1024US-TRT AMD EPYC NVMe server is a high performance low latency server suitable for virtualization, cloud and enterprise infrasructure applications.

Product SKUs
AS -1024US-TRT
  • A+ Server 1024US-TRT
Motherboard
H12DSU-iN
Processor/Chipset
CPU
  • Dual AMD EPYC™ 7002 Series Processors
  • Socket SP3
  • Supports CPU TDP up to 280W*
Cores
  • Up to 64 Cores
Chipset
  • System on Chip (SoC)
Note * Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory
Memory Capacity
  • 32 DIMM slots
  • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
  • 8-channel memory bus
Memory Type
  • DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
VGA
  • ASPEED AST2500 BMC
Expansion Slots
1U
  • 2 PCI-E 4.0 x16 (FH/HL 9.5″) slots
  • 1 PCI-E 4.0 x16 (LP) slot
  • 1 PCI-E 4.0 x16 (internal LP) proprietary slot

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Input / Output
SATA
  • 4 SATA3 (6 Gbps) ports
LAN
  • Dual 10GBase-T LAN ports via Intel® X710-AT2
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 3 USB 3.0 ports (2 rear + 1 Type A)
VGA
  • 1 VGA port
SAS
  • 4 SAS3 ports support via optional Add-on Card
NVMe
  • 4 NVMe support via optional cables
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connector
  • TPM 1.2 header
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
Chassis
Form Factor
  • 1U
Model
  • CSE-819UTS-R1K02P-A
Dimensions
Height
  • 1.7″ (43mm)
Width
  • 17.2″ (437mm)
Depth
  • 29″ (737mm)
Weight
  • Net Weight: 26 lbs (11.8 kg)
  • Gross Weight: 41 lbs (18.6 kg)
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Drive Bays
Hot-swap
  • 4 Hot-swap 3.5″ SATA3 drive bays
Backplane
HDD Backplane
  • Supports 4 SATA3 or 4 NVMe or 4 SAS3 HDD
System Cooling
Fans
  • 8 heavy-duty PWM fans with optimal fan speed control
Air Shroud
  • 2 Air Shroud
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power
  • 800W/1000W
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 – 7A / 50-60Hz
  • 200-240Vac / 7 – 5A / 50-60Hz
  • 200-240Vdc / 7 – 5A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 83A / Min: 0A (200-240Vac)
  • Max: 83A / Min: 0A (200-240Vdc)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%Titanium Level
Test Report ]
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 30°C (50°F to 86°F) or 10°C to 35°C (50°F to 95°F)*
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Note * Support for operating 35°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.

Supermicro AS -1124US-TNRP AMD EPYC 7002 2S 12×2.5 NVMe 8TB ECC 2x10GbE Virtualization Cloud Hosting Low Latency Storage Server

AS -1124US-TNRP

Supermicro AS -1124US-TNRP Technical Specifications

The Supermicro SuperServer AS -1124US-TNRP AMD EPYC NVMe server is a high performance low latency server suitable for virtualization, cloud and enterprise infrasructure applications.

Specifications 
Product SKUs
AS -1124US-TNRP
  • A+ Server 1124US-TNRP (Black)
Motherboard
Super H12DSU-iN
Processor/Cache
CPU
  • Dual AMD EPYC™ 7002 Series Processors
  • Socket SP3
  • Supports CPU TDP up to 280W*
Cores
  • Up to 64 Cores
Note * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory
Memory Capacity
  • 32 DIMM slots
  • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
  • 8-channel memory bus
Memory Type
  • DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • System on Chip (SoC)
SATA
  • SATA3 (6Gbps)
Network Connectivity
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
Input / Output
NVMe
  • 12 NVMe ports (default)
LAN
  • Dual 10GBase-T LAN ports via Intel® X710-AT2 + Dual 10G SFP+ via Intel® X710-AT2
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports
    (2 rear + 1 Type A + 1 front)
VGA
  • 1 VGA port
SAS
  • 12 SAS3 ports support via optional Add-on Card & cable & drive tray
SATA
  • 12 SATA3 ports support via optional cables & drive tray
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connectors
  • TPM 2.0 header
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-119UHTS-R1K22HP-T
Dimensions and Weight
Height
  • 1.7″ (43mm)
Width
  • 17.2″ (437mm)
Depth
  • 29.1″ (739mm)
Gross Weight
  • 48 lbs (21.8 kg)
Available Color
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System UID button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LEDs
  • UID LED
Expansion Slots
PCI-Express
  • 2 PCI-E 4.0 x16 (FH/HL, 9.5″L)
  • 1 PCI-E 4.0 x16 (LP)
  • 1 PCI-E 4.0 x16 (internal proprietary LP)

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot-swap
  • 12 Hot-swap 2.5″ NVMe drive bays
Backplane
HDD Backplane
  • Supports 12 NVMe or 12 SAS3 HDD or 12 SATA3
System Cooling
Fans
  • 8 Heavy duty fans with optimal fan speed control
Air Shroud
  • 1 Air Shroud
Power Supply
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 800W: 100 – 127Vac
  • 1200W: 200 – 240Vac
  • 1200W: 200 -240Vdc (for CCC only)
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 – 7A / 50-60Hz
  • 200-240Vac / 7.5 – 6A / 50-60Hz
  • 200-240Vdc / 7.5 – 6A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
  • Max: 100A / Min: 0A (200-240Vdc)
+12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%Titanium Level
Test Report ]
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 30°C (50°F ~ 86°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

Supermicro SYS-1029U-TN12RV 12×2.5 NVMe Scalable Xeon 6S 3TB Up to 25GbE Virtualization Cloud Low Latency Storage Server

SYS-1029U-TN12RV

Supermicro SYS-1029U-TN12RV Technical Specifications

The Supermicro SYS-1029U-TN12RV NVMe server is a low latency ultra high performance beast for your most demanding enterprise, virtualization and storage infrastructure applications

Product SKUs
SYS-1029U-TN12RV
  • SuperServer 1029U-TN12RV (Black)
Motherboard
Super X11DPU-V
Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores
Note  BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).

Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.

System Memory
Memory Capacity
  • 24 DIMM slots
  • Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
  • 2666 ECC DDR4 NVDIMM
Note  2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C621 chipset
SATA
  • SATA3 (6Gbps)
Network Connectivity
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
Input / Output
NVMe
  • 6 NVMe/SATA ports (NVMe from CPU 1)
  • 6 NVMe/SATA ports (NVMe from CPU 2)
LAN
  • Networking options provided via Ultra Riser card
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
Video
  • 1 VGA port
Serial Port
  • 1 Serial header
DOM
  • 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
Power Configurations
  • ACPI Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-119UHTS-R1K22HP-T
Dimensions and Weight
Height
  • 1.7″ (43mm)
Width
  • 17.2″ (437mm)
Depth
  • 29.1″ (739mm)
Gross Weight
  • 48 lbs (21.8 kg)
Available Color
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System UID button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LEDs
  • UID LED
Expansion Slots
PCI-Express
    • 1 PCI-E 3.0 x16 (FH, 10.5″L)
    • 1 PCI-E 3.0 x8 (LP)
    • 1 Internal PCI-E 3.0

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays / Storage
Hot-swap
  • 12 Hot-swap 2.5″ NVMe/SATA drive bays
  • Optional SAS support via SAS storage controller
M.2
  • 2 M.2 PCI-E 3.0 x4 M-Key NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
System Cooling
Fans
  • 8 Heavy duty fans with optimal fan speed control
Air Shroud
  • 1 Air Shroud
Power Supply
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 800W: 100 – 127Vac
  • 1200W: 200 – 240Vac
  • 1200W: 200 -240Vdc (for CCC only)
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 – 7A / 50-60Hz
  • 200-240Vac / 7.5 – 6A / 50-60Hz
  • 200-240Vdc / 7.5 – 6A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
  • Max: 100A / Min: 0A (200-240Vdc)
+12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%  Titanium Level
  Test Report ]
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

 

 

Gigabyte R152-Z32 (rev. 100) 6NR152Z32MR-00 AMD EPYC 7002 1S 10xNVMe M.2 2xGbE Low Latency Storage Server

R152-Z32 (rev. 100)

Gigabyte R152-Z32 (rev. 100)

Featuring New AMD EPYC™ 7002 Series Processors

The Gigabyte R152-Z32 (rev. 100) features AMD EPYC 7002 Series Processors which set a new standard for the modern datacenter. Driven by the AMD Infinity Architecture, the AMD EPYC 7002 Family is the first x86-architecture server processor based on 7nm process technology, a hybrid, multi-die architecture, PCIe® Gen4 I/O, and an embedded security architecture. Together, these innovative capabilities deliver what you need. Performance leadership for your workloads. Protection at every layer to help secure your CPU, applications, and data—whether in your enterprise datacenter or the public cloud. And with the range of features you need to power your datacenter, you can adapt your IT infrastructure to match workload challenges you face today and into the future.

Technical Specifications

Gigabyte R152-Z32 (rev. 100)

  • Dimensions (WxHxD, mm)
    1U
    438 x 43.5 x 710
  • Motherboard
  • CPU
    AMD EPYC™ 7002 series processor family
    Single processor, 7nm technology
    Up to 64-core, 128 threads per processor
    TDP up to 225W, cTDP up to 240WConditional support 280WCompatible with AMD EPYC™ 7001 series processor family
  • Chipset
    System on Chip
  • Memory
    16 x DIMM slots
    DDR4 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 64GB supported
    LRDIMM modules up to 128GB supported
    Memory speed: Up to 3200*/ 2933 MHz- Note:
    * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
  • LAN
    2 x 1GbE LAN ports (1 x Intel® I350-AM2)
    1 x 10/100/1000 management LAN
  • Video
    Integrated in Aspeed® AST2500
    2D Video Graphic Adapter with PCIe bus interface
    1920×1200@60Hz 32bpp
  • Audio
  • Storage
    10 x 2.5″ NVMe hot-swappable SSD bays
  • SAS
  • RAID
  • Peripheral Drives
  • Expansion Slots
    Riser Card CRS101D:
    – 1 x PCIe x16 slot (Gen4 x16), Full height half-length1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4)
    – Occupied by CNVO124, 4 x NVMe HBA2 x M.2 slots:
    – M-key
    – PCIe Gen3 x4
    – Supports NGFF-2242/2260/2280 cards
  • Internal I/O
    2 x M.2 slots
    1 x USB 3.0 header
    1 x USB 2.0 header
    1 x COM_2 header
    1 x TPM header
    1 x Front panel header
    1 x HDD back plane board header
    1 x PMBus connector
    1 x IPMB connector
    1 x Clear CMOS jumper
    1 x BIOS recovery jumper
    1 x Buzzer
  • Front I/O
    1 x USB 3.0
    1 x Power button with LED
    1 x ID button with LED
    1 x NMI button
    1 x Reset button
    2 x LAN activity LEDs
    1 x HDD activity LED
    1 x System status LED
  • Rear I/O
    3 x USB 3.0
    1 x VGA
    1 x COM
    2 x RJ45
    1 x MLAN
    1 x ID button with LED
  • Backplane I/O
    Backplane P/N: 9CBP10A3NR-00
    Speed and bandwidth:
    PCIe Gen3 x4
  • TPM
    1 x TPM header with SPI interface
    Optional TPM2.0 kit: CTM010
  • Power Supply
    2 x 1100W redundant power supply
    80 PLUS PlatinumAC Input:
    – 100-240V~/ 12-6A, 50-60Hz
    DC Input:
    – 190-310Vdc/ 7ADC Output:
    – Max 850W/ 100-240Vac~
    +12V/ 70A
    +5Vsb/ 3A
    – Max 1100W/ 200-240Vac
    +12V/ 90.5A
    +5Vsb/ 3A
  • System Management
    Aspeed® AST2500 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    • Dashboard
    • JAVA Based Serial Over LAN
    • HTML5 KVM
    • Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    • Sensor Reading History Data
    • FRU Information
    • SEL Log in Linear Storage / Circular Storage Policy
    • Hardware Inventory
    • Fan Profile
    • System Firewall
    • Power Consumption
    • Power Control
    • LDAP / AD / RADIUS Support
    • Backup & Restore Configuration
    • Remote BIOS/BMC/CPLD Update
    • Event Log Filter
    • User Management
    • Media Redirection Settings
    • PAM Order Settings
    • SSL Settings
    • SMTP Settings
  • OS Supported
    Windows Server 2016 ( X2APIC/256T not supported)
    Windows Server 2019Red Hat Enterprise Linux 7.6 ( x64) or later
    Red Hat Enterprise Linux 8.0 ( x64) or laterSUSE Linux Enterprise Server 12 SP4 ( x64) or later
    SUSE Linux Enterprise Server 15 SP1 ( x64) or laterUbuntu 16.04.6 LTS (x64) or later
    Ubuntu 18.04.3 LTS (x64) or laterVMware ESXi 6.5 EP15 or later
    VMware ESXi 6.7 Update3 or laterCitrix Hypervisor 8.1.0
  • Weight
    Net Weight: 11.74 kg
    Gross Weight: 20.32 kg
  • System Fans
    5 x 40x40x56mm (23’000rpm)
  • Operating Properties
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)Ambient temperature limited to 30°C if using 280W CPU
  • Packaging Dimensions
    985 x 588 x 250 mm
  • Packaging Content
    1 x R152-Z32
    1 x CPU heatsink
    1 x Rail kit
  • Part Numbers
    Barebone package: 6NR152Z32MR-00
    Spare parts:
    – Motherboard: 9MZ32AR0NR-00
    – Rail kit: 25HB2-3A0202-K0R
    – CPU heatsink: 25ST1-44320G-A0R
    – Back plane board: 9CBP10A3NR-00
    – OCP NVMe Card: 9CNVO124NR-00
    – Fan module: 25ST2-44562G-D0R
    – Power supply: 25EP0-201100-F3S
    – Fan duct for 280W CPU: 25HA8-R15200-S5R ( optional)
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

Gigabyte R182-Z92 (rev. 100) 6NR182Z92MR-00 AMD EPYC 7002 2S 10xNVMe M.2 2xGbE Low Latency Storage Server

R182-Z92 (rev. 100)

Gigabyte R182-Z92 (rev. 100)

Featuring New AMD EPYC™ 7002 Series Processors

The Gigabyte R182-Z92 (rev. 100) features AMD EPYC 7002 Series Processors which set a new standard for the modern datacenter. Driven by the AMD Infinity Architecture, the AMD EPYC 7002 Family is the first x86-architecture server processor based on 7nm process technology, a hybrid, multi-die architecture, PCIe® Gen4 I/O, and an embedded security architecture. Together, these innovative capabilities deliver what you need. Performance leadership for your workloads. Protection at every layer to help secure your CPU, applications, and data—whether in your enterprise datacenter or the public cloud. And with the range of features you need to power your datacenter, you can adapt your IT infrastructure to match workload challenges you face today and into the future.

Technical Specifications

Gigabyte R182-Z92 (rev. 100)

  • Dimensions (WxHxD, mm) 1U 438 x 43.5 x 730
  • Motherboard
    MZ92-FS0
  • CPU
    AMD EPYC™ 7002 series processor family
    Dual processors, 7nm, Socket SP3
    Up to 64-core, 128 threads per processor
    TDP up to 225W, cTDP up to 240WConditional support 280WNOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailableCompatible with AMD EPYC™ 7001 series processor family
  • Chipset
    System on Chip
  • Memory
    32 x DIMM slots
    DDR4 memory supported only
    8-Channel memory per processor architecture
    RDIMM modules up to 64GB supported
    LRDIMM modules up to 128GB supported
    Memory speed: Up to 3200*/ 2933 MHz- Note:
    * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
  • LAN
    2 x 1GbE LAN ports (1 x Intel® I350-AM2)
    1 x 10/100/1000 management LAN
  • Video
    Integrated in Aspeed® AST2500
    2D Video Graphic Adapter with PCIe bus interface
    1920×1200@60Hz 32bpp
  • Audio
  • Storage
    10 x 2.5″ NVMe hot-swappable SSD bays
  • SAS
  • RAID
  • Peripheral Drives
  • Expansion Slots
    Riser Card CRS101E:
    – 1 x PCIe x16 slot (Gen4 x16), FHHLRiser Card CRS101E:
    – 1 x PCIe x16 slot (Gen4 x16), FHHL1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
    Supported NCSI function1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2)
    Supported NCSI function1 x M.2 slot:
    – M-key
    – PCIe Gen3 x4
    – Supports NGFF-2242/2260/2280/22110 cards
    – CPU TDP is limited to 225W if using M.2 device
  • Internal I/O
    1 x M.2 slot
    1 x USB 3.0 header
    1 x COM header
    1 x TPM header
    1 x Front panel header
    1 x HDD back plane board header
    1 x PMBus connector
    1 x IPMB connector
    1 x Clear CMOS jumper
    1 x BIOS recovery jumper
  • Front I/O
    1 x USB 3.0
    1 x Power button with LED
    1 x ID button with LED
    1 x NMI button
    1 x Reset button
    2 x LAN activity LEDs
    1 x HDD activity LED
    1 x System status LED
  • Rear I/O
    2 x USB 3.0
    1 x VGA
    2 x RJ45
    1 x MLAN
    1 x ID button with LED
  • Backplane I/O
    Backplane P/N: 9CBP10A3NR-00
    Speed and bandwidth:
    SAS 12Gb/s, SATA 6Gb/s, PCIe Gen3 x4
  • TPM
    1 x TPM header with SPI interface
    Optional TPM2.0 kit: CTM010
  • Power Supply
    2 x 1200W redundant PSUs
    80 PLUS PlatinumAC Input:
    – 100-240V~/ 12-7A, 50-60Hz
    DC Input:
    – 240Vdc/ 6ADC Output:
    – Max 1000W/ 100-240V~
    +12V/ 80.5A
    +12Vsb/ 3A
    – Max 1200W/ 200-240V~ or 240Vdc input
    +12V/ 97A
    +12Vsb/ 3ANOTE:
    * Select 1600W power supply if using 280W CPU with full loading configuration
  • System Management
    Aspeed® AST2500 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    • Dashboard
    • JAVA Based Serial Over LAN
    • HTML5 KVM
    • Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    • Sensor Reading History Data
    • FRU Information
    • SEL Log in Linear Storage / Circular Storage Policy
    • Hardware Inventory
    • Fan Profile
    • System Firewall
    • Power Consumption
    • Power Control
    • LDAP / AD / RADIUS Support
    • Backup & Restore Configuration
    • Remote BIOS/BMC/CPLD Update
    • Event Log Filter
    • User Management
    • Media Redirection Settings
    • PAM Order Settings
    • SSL Settings
    • SMTP Settings
  • OS Compatibility
    Windows Server 2016 ( X2APIC/256T not supported)
    Windows Server 2019Red Hat Enterprise Linux 7.6 ( x64) or later
    Red Hat Enterprise Linux 8.0 ( x64) or laterSUSE Linux Enterprise Server 12 SP4 ( x64) or later
    SUSE Linux Enterprise Server 15 SP1 ( x64) or laterUbuntu 16.04.6 LTS (x64) or later
    Ubuntu 18.04.3 LTS (x64) or laterVMware ESXi 6.5 EP15 or later
    VMware ESXi 6.7 Update3 or laterCitrix Hypervisor 8.1.0
  • Weight
    Net Weight: 13 kg
    Gross Weight: 22 kg
  • System Fans
    8 x 40x40x56mm (23’000rpm)
  • Operating Properties
    Operating temperature: 10°C to 35°C
    Operating humidity: 8-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)Ambient temperature limited to 30°C if using 280W CPU
  • Packaging Dimensions
    985 x 588 x 250 mm
  • Packaging Content
    1 x R182-Z92
    2 x CPU heatsinks
    1 x Rail kit
  • Part Numbers
    Barebone package: 6NR182Z92MR-00
    Spare parts:
    – Motherboard: 9MZ92FS0NR-00
    – Rail kit: 25HB2-3A0202-K0R
    – CPU heatsink: 25ST1-44320G-A0R
    – Back plane board: 9CBP10A3NR-00
    – Fan module: 25ST2-44562G-D0R
    – NVMe HBA_CNVP141: 9CNVP141NR-00
    – Power supply: 25EP0-212007-F3S
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

Gigabyte R282-Z92 (rev. 100) 6NR282Z92MR-00 AMD EPYC 7002 2S 24xNVMe M.2 2xGbE Low Latency Storage Server

R282-Z92 (rev. 100)

Gigabyte R282-Z92 (rev. 100)

Featuring New AMD EPYC™ 7002 Series Processors

The Gigabyte R282-Z92 features AMD EPYC 7002 Series Processors which set a new standard for the modern datacenter. Driven by the AMD Infinity Architecture, the AMD EPYC 7002 Family is the first x86-architecture server processor based on 7nm process technology, a hybrid, multi-die architecture, PCIe® Gen4 I/O, and an embedded security architecture. Together, these innovative capabilities deliver what you need. Performance leadership for your workloads. Protection at every layer to help secure your CPU, applications, and data—whether in your enterprise datacenter or the public cloud. And with the range of features you need to power your datacenter, you can adapt your IT infrastructure to match workload challenges you face today and into the future.

Technical Specifications

Gigabyte R282-Z92 (rev. 100)

  • Dimensions (WxHxD, mm)
    2U
    438 x 87 x 730 mm
  • Motherboard
    MZ92-FS0
  • CPU
    AMD EPYC™ 7002 series processor family
    Dual processors, 7nm, Socket SP3
    Up to 64-core, 128 threads per processor
    TDP up to 225W, cTDP up to 240WFully support 280WNOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailableCompatible with AMD EPYC™ 7001 series processor family
  • Chipset
    System on Chip
  • Memory
    32 x DIMM slots
    DDR4 memory supported only
    8-Channel memory per processor architecture
    RDIMM modules up to 64GB supported
    LRDIMM modules up to 128GB supported
    Memory speed: Up to 3200*/ 2933 MHz- Note:
    * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
  • LAN
    2 x 1GbE LAN ports (1 x Intel® I350-AM2)
    1 x 10/100/1000 management LAN
  • Video
    Integrated in Aspeed® AST2500
    2D Video Graphic Adapter with PCIe bus interface
    1920×1200@60Hz 32bpp
  • Storage
    Front side: 24 x 2.5″ NVMe hot-swappable HDD/SSD bays
    Rear side: 2 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays, from onboard SATA ports
  • RAID
  • Peripheral Drives
  • Expansion Slots
    Riser Card CRS2014:
    – 1 x PCIe x16 slot (Gen4 x16), Occupied by CNV3024, 4 x NVMe HBARiser Card CRS2033:
    – 1 x PCIe x16 slot (Gen4 x16), FHHL, Occupied by CNV3024, 4 x NVMe HBA
    – 1 x PCIe x8 slot (Gen4 x8), FHHL, Occupied by CNV3022, 2 x NVMe HBA
    – 1 x PCIe x8 slot (Gen4 x8), FHHLRiser Card CRS2033:
    – 1 x PCIe x16 slot (Gen4 x16), FHHL, Occupied by CNV3024, 4 x NVMe HBA
    – 1 x PCIe x8 slot (Gen4 x8), FHHL, Occupied by CNV3022, 2 x NVMe HBA
    – 1 x PCIe x8 slot (Gen4 x8), FHHL1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
    Supported NCSI function, Occupied by CNVO134, 4 x NVMe HBA1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2)
    Supported NCSI function, Occupied by CNVO022, 2 x NVMe HBA1 x M.2 slot:
    – M-key
    – PCIe Gen3 x4
    – Supports NGFF-2242/2260/2280/22110 cards
    – CPU TDP is limited to 225W if using M.2 device
  • Internal I/O
    1 x M.2 slot
    1 x USB 3.0 header
    1 x COM header
    1 x TPM header
    1 x Front panel header
    1 x HDD back plane board header
    1 x PMBus connector
    1 x IPMB connector
    1 x Clear CMOS jumper
    1 x BIOS recovery jumper
  • Front I/O
    2 x USB 3.0
    1 x Power button with LED
    1 x ID button with LED
    1 x Reset button
    1 x NMI button
    1 x System status LED
    1 x HDD activity LED
    2 x LAN activity LEDs
  • Rear I/O
    2 x USB 3.0
    1 x VGA
    2 x RJ45
    1 x MLAN
    1 x ID button with LED
  • Backplane I/O
    Front side_CBP20O5: 24 x NVMe ports
    Rear side_CBP2020: 2 x SATA/SAS ports
    Speed and bandwidth: SATA 6Gb/s, SAS 12Gb/s or PCIe x4 per port
  • TPM
    1 x TPM header with SPI interface
    Optional TPM2.0 kit: CTM010
  • Power Supply
    2 x 1600W redundant PSUs
    80 PLUS PlatinumAC Input:
    – 100-127V~/ 12A, 47-63Hz
    – 200-240V~/ 9.48A, 47-63HzDC Output:
    – Max 1000W/ 100-127V
    +12V/ 82A
    +12Vsb/ 2.1A
    – Max 1600W/ 200-240V
    +12V/ 132A
    +12Vsb/ 2.1A
  • System Management
    Aspeed® AST2500 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    • Dashboard
    • JAVA Based Serial Over LAN
    • HTML5 KVM
    • Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    • Sensor Reading History Data
    • FRU Information
    • SEL Log in Linear Storage / Circular Storage Policy
    • Hardware Inventory
    • Fan Profile
    • System Firewall
    • Power Consumption
    • Power Control
    • LDAP / AD / RADIUS Support
    • Backup & Restore Configuration
    • Remote BIOS/BMC/CPLD Update
    • Event Log Filter
    • User Management
    • Media Redirection Settings
    • PAM Order Settings
    • SSL Settings
    • SMTP Settings
  • OS Supported
    Windows Server 2016 ( X2APIC/256T not supported)
    Windows Server 2019Red Hat Enterprise Linux 7.6 ( x64) or later
    Red Hat Enterprise Linux 8.0 ( x64) or laterSUSE Linux Enterprise Server 12 SP4 ( x64) or later
    SUSE Linux Enterprise Server 15 SP1 ( x64) or laterUbuntu 16.04.6 LTS (x64) or later
    Ubuntu 18.04.3 LTS (x64) or laterVMware ESXi 6.5 EP15 or later
    VMware ESXi 6.7 Update3 or laterCitrix Hypervisor 8.1.0
  • Weight
    Net Weight: 18.5 kg
    Gross Weight: 25.5 kg
  • System Fans
    4 x 80x80x38mm (16,300rpm)
  • Operating Properties
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
  • Packaging Dimensions
    982 x 588 x 268 (mm)
  • Packaging Content
    1 x R282-Z92 system
    2 x CPU heatsinks
    1 x Rail kit
  • Part Numbers
    Barebone package: 6NR282Z92MR-00
    Spare parts:
    – Motherboard: 9MZ92FS0NR-00
    – Rail kit: 25HB2-3A0202-K0R
    – CPU heatsink: 25ST1-15320E-J1R
    – Back plane board_24-port: 9CBP20O5NR-00
    – Back plane board_2-port: 9CBP2020NR-00
    – Front panel board: 9CFP2001NR-00
    – Fan module: 25ST2-883829-D0R
    – Power supply: 25EP0-216008-L0S
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.