- Manufacturer Part Number: MT242A-F
- Network (RJ-45): Yes
- Number of Network (RJ-45) Ports: 1
- BNC In: Yes
- BNC Out: Yes
- Number of BNC Inputs: 1
- Number of BNC Outputs: 1
- Height: 0.8″
- Width: 1.7″
- Depth: 2.7″
- Environmentally Friendly: Yes
- Environmental Certification:
- WEEE
- RoHS
- Limited Warranty: 1 Year
Overview
G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.
Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.
The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 – 120-ohm High-Speed Adapters support data rates to 8 Mbps.
These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.
Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.
Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.
The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.
The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.
Reviews
There are no reviews yet.