- Manufacturer Part Number: FVR10D1A2C1M1
- Total Number of Ports: 1
- Number of ST Ports: 1
- ST Port Type:
- Simplex
- Duplex
- Media Type Supported: Optical Fiber
- Fiber Mode Supported: Multi-mode
- Fiber Optic Wavelength:
- 1310 nm
- 1550 nm
- Maximum Distance Supported: 1.86 Mile
- Fiber Optic Cable Standard: 62.5/125 µm
- Power Source: Power Supply
- Power Consumption: 4 W
- Form Factor:
- DIN Rail Mountable
- Rack-mountable
- Standalone
- Height: 2.2″
- Width: 5.3″
- Depth: 6.1″
- Package Contents:
- FVR10D1A2C1M1 Transceiver/Media Converter
- Power Supply
- Environmentally Friendly: Yes
- Environmental Certification:
- RoHS
- WEEE
- Country of Origin: United States
- Limited Warranty: Lifetime
Package Contents
- FVR10D1A2C1M1 Transceiver/Media Converter
- Power Supply
Overview
The ComNet™ FVT/FVR10D1A2C1 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for highquality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of one independent video channel and one bi-directional data channel over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. They also provide transmission of two bi-directional audio signals and one bi-directional contact closure over the same fiber. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio. It also supports “up-the-coax” data transmission from all major manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
FEATURES
- 10-bit digital video transmission: transmits one real-time color video signal and one bi-directional data signal on one optical fiber
- Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
- Two bi-directional Audio Channels
- One bi-directional Contact Closure
- 24-Bit 96kHz Digitally Encoded Transmission
- 20Hz – 18 kHz Audio Bandwidth
- 600 Ohms Audio Input Impedence
- Transmits Balanced Line-Level Audio up to +6dBm
- Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
- Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
- Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events.
- Robust design ensures extremely high reliability in unconditioned out-of-plant environments
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use – ComFit
- Lifetime Warranty
Reviews
There are no reviews yet.