Supermicro 2015TA-HTRF 2U Twin 8xNodes Each with Atom D525 4GB 2xGbE 3×2.5HS SATA R720W Embedded Hyperconverged High Density Server


SKU: SYS-2015TA-HTRF Categories: ,
Safe Checkout

Server Systems Management

Supermicro Server Manager (SSM) provides capabilities to monitor the health of server components including memory, hard drives and RAID controllers. It enables the datacenter administrator to monitor and manage power usage across all Supermicro servers allowing users to maximize their CPU payload while mitigating the risk of tripped circuit. Firmware upgrades on Supermicro servers became easier now with a couple of clicks. Administrators can now mount an ISO image on multiple servers and reboot the servers with those images. The tool also provides pre-defined reports and many more features that will make managing Supermicro servers simpler. Download the SSM_brochure for more info or download Supermicro SuperDoctor® device monitoring and management software.

Technical Specifications

Mfr Part # SYS-2015TA-HTRF
Motherboard 4x Super X7SPT-DF-D525+
CPU processor
System Bus DMI
Two 204-pin SO-DIMM sockets; Up to 4GB unbuffered non-ECC DDR3 800MHz SO-DIMM (Single Channel)
Memory Type DDR3 800MHz unbuf., non-ECC SO-DIMM
DIMM Sizes 2 GB, 1 GB, 512 MB, 256 MB
Memory Voltage 1.5V only
Chipset Intel ICH9R Express; Intel 82574L
SATA 6x SATA (3 Gbps); RAID 0, 1, 5, 10 support (Windows); RAID 0, 1, 10 support (Linux)
IPMI Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; Nuvoton WPCM450 BMC
Network Controllers High Performance Intel® 82574L Dual Port Gigabit LAN; Virtual Machine Device Queues High efficient I/O overhead; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA Matrox G200eW 16MB DDR2
Super I/O Nuvoton W83627DHG UBE
Serial ATA 3x SATA ports (3Gbps) through hot-plug slot, with RAID 0, 1, 5; 1x SATA port onboard
USB 6 USB 2.0 ports (2 rear + 4 via 2 headers)
LAN 2x RJ45 LAN port
Integrated IPMI 2.0 with shared LAN
DOM 1x DOM (Disk on Module) power connector
Others 2x COM port headers ready; TPM 20-pin header ready
BIOS Features Plug and Play (PnP); DMI 2.3; PCI 2.2; ACPI 1.0 / 2.0 / 3.0; USB Keyboard support; SMBIOS 2.3
Form Factor 2U Rackmount
Buttons Power On/Off button
LEDs Power status LED; Network activity LED; System overheat/fan fail/power fail LED
Hot-swap 24x 2.5″ Hot-swap SATA drive bays total; Enterprise SATA HDD only recommended
Fans 4x 80mm heavy duty fans with PWM; fan speed controls
AC Input 100-240 V, 50-60 Hz, 4-9 Amp
DC Output 3 Amp @ +5V standby; 59 Amp @ +12V
With Power Distributor +5V: 30 Amp
CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.; CPU Core 6-Phase-switching voltage regulator
FAN Total of four 4-pin PWM fans; 4x fans with tachometer monitoring; Status monitor for speed control; Status monitor for on/off control; Low noise fan speed control
Temperature Monitoring for CPU and chassis environment; CPU thermal trip support; Thermal Control for 4x Fan Connectors; PSU I; C temperature sensing logic; Thermal Monitor 2 (TM2) support; PECI
LED Power Fail / Overheat LED; Suspend-state Indicator LED
Other Features SDDC Support
RoHS RoHS Compliant
Environmental Spec. Operating Temperature: 10°to 35°C (50°to 95°F); Non-operating Temperature: -40°to 70°C (-40°to 158°F); Operating Relative Humidity: 8% to 90% (non-condensing); Non-operating Relative Humidity: 5 to 95% (non-condensing)
Weight 85 lbs
Dimensions 26.75 × 17.2 × 3.47 in


There are no reviews yet.

Be the first to review “Supermicro 2015TA-HTRF 2U Twin 8xNodes Each with Atom D525 4GB 2xGbE 3×2.5HS SATA R720W Embedded Hyperconverged High Density Server”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top