Supermicro SYS-5018A-TN7B | 5018A-TN7B Embedded Server


SKU: SYS-5018A-TN7B Categories: ,

Supermicro SYS-5018A-TN7B | 5018A-TN7B Atom C2758 Mini 1U SoC 64GB 7xGbE LANByPass 1×3.5/4×2.5Fixed 200W Embedded Virtualization Network Appliance Home Lab Server

Key Features

  • Intel® Atom processor C2758, SoC, FCBGA 1283, 20W 8-Core
  • 7x GbE LAN including 6 ports LAN bypass (SW programmable) ports w/ SoC I354, I350-AM2 and I210-AT
  • 1x 3.5″ Fixed drive bay or 4x 2.5″ drive bays w/ optional bracket
  • 1x PCI-E 2.0 x4 (in x8) slot
  • Up to 64GB DDR3 1600MHz ECC or non-ECC UDIMM
  • IPMI 2.0 with shared LAN
  • 2x 4cm counter-rotating PWM fans; Support up to 3x system fans
  • 200W Multi-output power supply
  • Product Type: Embedded Server Barebone (chassis, motherboard, embedded CPU, power supply)
  • Manufacturer Part Number: SYS-5018A-TN7B

For complete system configuration with CPU, memory, hard drive etc, please select a Dihuni OptiReady model below (if listed) or use ‘Request Quote’ or contact us by email or phone.


Supermicro Embedded Systems Featuring Intel Atom® C2000 Series Processor

Based on the low-power Silvermont microarchitecture, Intel Atom® C2000 family extends the scalability of Intel® architecture into smaller footprints, dense communications, and intelligent systems applications. This product family offers a range of multi-core processing capabilities (from two cores to eight cores) and features high levels of I/O and acceleration integration, resulting in a scalable, single-chip system-on-chip (SoC). Based on the 22-nanometer process technology with 3D tri-gate transistors, the product family provides optimal performance per watt, addressing the needs of thermally constrained solutions, such as entry to midrange branch office routers, security appliances, network access, communications servers, small cells, control plane processing, and storage. When paired with the Intel® Data Plane Development Kit (Intel® DPDK), this platform improves packet processing speeds to handle increased network traffic data rates and associated control and signaling infrastructure requirements.

“Supermicro is expanding our Embedded Building Blocks with a new IoT gateway product that provides complete edge-to-cloud solutions for data aggregation and analytics. The addition of this new class of device to our embedded server and storage solutions provides maximum flexibility to configure scalable computing infrastructure optimized for enterprise, commercial and industrial automation applications.”  

Charles Liang, President and CEO of Supermicro

Server Systems Management

Supermicro Server Manager (SSM) provides capabilities to monitor the health of server components including memory, hard drives and RAID controllers. It enables the datacenter administrator to monitor and manage power usage across all Supermicro servers allowing users to maximize their CPU payload while mitigating the risk of tripped circuit. Firmware upgrades on Supermicro servers became easier now with a couple of clicks. Administrators can now mount an ISO image on multiple servers and reboot the servers with those images. The tool also provides pre-defined reports and many more features that will make managing Supermicro servers simpler. Download the SSM_brochure for more info or download Supermicro SuperDoctor® device monitoring and management software.

Technical Specifications

Mfr Part # SYS-5018A-TN7B
Motherboard Super A1SRM-LN7F-2758
CPU Intel® Atom® Processor C2758; CPU TDP 20W (8-Core); FCBGA 1283; System-on-Chip
Memory Capacity 4x 240-pin DDR3 UDIMM slots; Supports up to 64GB DDR3 ECC or non-ECC memory
Memory Type 1600/1333MHz ECC or non-ECC DDR3 SDRAM, 240-pin gold-plated DIMMs, x8 width only
DIMM Sizes 16GB, 8GB, 4GB, 2GB
Memory Voltage 1.5 V, 1.35 V
SATA SoC SATA3 (6Gbps), SATA2 (3Gbps)
Network Controllers Quad GbE LAN w/ Intel C2000 SoC i354 – 2 pairs LAN bypass; Single GbE LAN w/ Intel i210-AT; Dual GbE LAN w/ Intel Ethernet controller i350-AM2 – 1 pair LAN bypass
IPMI Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; Aspeed AST 2400 BMC
Graphics BMC integrated ASPEED AST2400
USB 2.0 C2000 SoC
Serial ATA 2x SATA3 (6Gbps) ports; 4x SATA2 (3Gbps) ports
LAN 7x RJ45 Gigabit Ethernet LAN ports with shared LAN IPMI 2.0
USB 7x USB 2.0 ports (4 rear, 1 Type A, 2 via header)
Serial Port 2x Fast UART 16550 Serial Port (1 rear with RJ45, 1 via header)
DOM 1x; (Disk on Module) power connector; 1x; Supermicro SATA DOM with built-in power connector
VGA 1x VGA Port
Others TPM 1.2 header
Software Watch Dog; NMI
Power Configurations ACPI / ACPM Power Management; Main Switch Override Mechanism; Power-on mode for AC power recovery
Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
FAN Total of 3x 4-pin fan headers; 3x fans with tachometer status monitoring; Status monitor for speed control; Status monitor for on/off control; Low noise fan speed control; Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment; CPU thermal trip support
LED System Overheat LED
Other Features Intel® QuickAssist Technology; 3x pairs software programmable GbE LAN Bypass ports
Form Factor 1U Rackmount
Height 1.7″ (43mm)
Width 17.2″ (437mm)
Depth 11.3″ (287mm)
Package 6.1″ (H) x 25.4″ (W) x 19.8″ (D)
Weight Net Weight: 8.45 lbs (3.83 kg); Gross Weight: 12.55 lbs (5.69 kg)
Available Colors Black
Buttons Power On/Off button; System Reset button
LEDs Power LED; Hard drive activity LED; 2x Network activity LEDs; System Overheat LED; Information LED (temp., status)
PCI-E 1x PCI-E 2.0 x4 (in x8) slot
HDD 1x 3.5″ or 4x 2.5″ (opt. bracket required) internal drive bays
Fans 2x 4cm counter rotating PWM fans, support up to three system fans
AC Voltage 100 – 240V, 50-60Hz, 2.6 Amp Max
+5V 8.0 Amp (max.)
+5V standby 2.0 Amp (max.)
+12V 16 Amp (max.)
-12V 0.5 Amp (max.)
+3.3V 8.0 Amp (max.)
BIOS Features Plug and Play (PnP); DMI 2.3; ACPI 5.0; USB Keyboard support; SMBIOS 2.7.1; UEFI
RoHS RoHS Compliant
Environmental Spec. Operating Temperature:; 10°C to 40°C (50°F to 104°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing)

Additional information

Weight 12.55 lbs
Dimensions 11.3 × 17.2 × 1.7 in






Product Type

Processor Core

Octa-core (8 Core)



Processor Manufacturer


Number of Processors


Maximum Power Supply

200 W

Product Family

Processor Model


Rack Height



Form Factor


Processor Speed

2.40 GHz

Processor Type


Maximum Memory

64 GB


There are no reviews yet.

Be the first to review “Supermicro SYS-5018A-TN7B | 5018A-TN7B Embedded Server”

Your email address will not be published. Required fields are marked *