Mfr Part # |
SYS-F618R2-RC1PT+ |
Motherboard |
Super X10DRFR-NT |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 145W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 2TB; ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SAS |
Broadcom 3108 SAS3 (12Gbps) controller;; HW RAID 0, 1, 5, 6, 10, 50 |
SATA |
SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® X540 Dual Port 10GBase-T; Virtual Machine Device Queues reduce I/O overhead; Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics |
ASPEED AST2400 BMC |
SAS |
6 SAS3 (12Gbps) ports |
NVMe |
2 Internal NVMe ports (PCI-E 3.0 x4); Note: NVMe support requires 2 CPUs installed |
LAN |
2 RJ45 10GBase-T LAN ports; 1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports |
VGA |
1 VGA port |
Software |
Intel® Node Manager; Watch Dog; NMI; IPMI 2.0; and |
Power Configurations |
ACPI / APM Power Management; Power-on mode for AC power recovery |
Form Factor |
4U Rackmount |
Model |
|
Width |
17.63″ (448mm) |
Height |
6.96″ (177mm) |
Depth |
29″ (737mm) |
Package |
28.3″ (W) x 15.0″ (H) x 42.4″ (D) |
Weight |
Net Weight: 150 lbs (68.04 kg); Gross Weight: 200 lbs (90.71 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; UID button |
LEDs |
Power status LED; Hard drive activity LED; 2 Network activity LEDs; Information LED (UID, Fan failure, Overheat) |
PCI-Express |
1 PCI-E 3.0 x16 Low-profile; 1 PCI-E 3.0 x8 (Micro LP); (Networking options) |
Hot-swap |
6x 2.5″ Hot-swap SAS/SATA drives; Optional NVMe support; Note: NVMe support requires 2 CPUs installed |
Fans |
3x 4cm 14k RPM middle fans |
Total Output Power |
1000W/1800W/1980W/2000W |
Dimension
(W x H x L) |
76 x 40 x 336 mm |
Input |
100-127 Vac / 12-9.5 A / 50-60 Hz; 200-220 Vac / 10-9.5 A / 50-60 Hz; 220-230 Vac / 10-9.8 A / 50-60 Hz; 230-240 Vac / 10-9.8 A / 50-60 Hz; 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only) |
+12V |
Max: 83.3A / Min: 0A (100-127 Vac); Max: 150A / Min: 0A (200-220 Vac); Max: 165A / Min: 0A (220-230 Vac); Max: 166.7A / Min: 0A (230-240 Vac); Max: 166.7A / Min: 0A (200-240 Vac); (UL/cUL only) |
+5Vsb |
Max: 1A / Min: 0A |
Output Type |
27 Pairs Gold Finger Connector |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; PCI 2.2; ACPI 1.0 / 2.0; USB Keyboard support; SMBIOS 2.3; UEFI |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.