Mfr Part # |
MBD-A2SDi-2C-HLN4F |
Form Factor |
Mini-ITX |
Dimensions |
6.7″ x 6.7″ (17.02cm x 17.02cm) |
CPU |
Intel® Atom™ Processor C3338.; Single Socket FCBGA1310 supported, CPU TDP support 9W |
Cores / Cache |
2 cores, 2 threads / 4MB cache |
Memory Capacity |
Up to 128GB Registered ECC RDIMM and DDR4-1866MHz; Up to 32GB Unbuffered ECC/non-ECC UDIMM, DDR4-1866MHz, in 2 DIMM slots |
Memory Type |
2400/2133/1866/1600MHz (Operating speed up to 1866MHz) |
DIMM Sizes |
4GB, 8GB, 16GB, 32GB, 64GB |
Memory Voltage |
1.2V |
Error Detection |
Corrects single-bit errors; Detects double-bit errors (using ECC memory) |
Chipset |
System on Chip |
SATA |
Up to 8 SATA3(6 Gbps) ports via SoC. *Number of SATA ports is configurable via BIOS setup: 4, 6, or 8. Total combined PCI-E lanes and SATA ports is up to 8. |
IPMI |
ASPEED AST2400 BMC |
Network Controllers |
Quad LAN with Intel® C3000 SoC
1GbE |
Graphics |
Aspeed AST2400 BMC |
LAN |
4 RJ45 Gigabit Ethernet LAN ports |
USB |
4 USB 2.0 ports (2 rear + 2 headers),; 1 USB 3.0 ports ( + 1 Type A) |
Video Output |
1 VGA port |
Serial Port / Header |
1 COM Port (1 header) |
TPM |
TPM Header |
PCI-E |
1 PCI-E 3.0 up to x4 (in x4 slot); *Number of PCI-E lane is configurable via BIOS setup: 0, 2, or 4. Total combined PCI-E lanes and SATA ports is up to 8. |
BIOS Type |
AMI UEFI |
BIOS Features |
UEFI 2.4; SMBIOS 2.7.1 |
Software |
IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® 5, Watchdog |
Power Configurations |
ATX Power connector; +12V DC Power Input; CPU thermal trip support for processor protection; Power-on mode for AC power recovery |
Voltage |
+12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, 4 -fan status, 4 fans with tachometer monitoring, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT |
FAN |
4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors |
Temperature |
CPU thermal trip support |
LED |
UID/Remote UID |
Other Features |
12V DC or ATX Power Source, 4-pin 12v DC power connector, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Innovation Engine, RoHS, SDDC, System level control, UID, WOL |
Operating Temperature Range |
0°C ~ 60°C (32°F ~ 140°F) |
Non-Operating Temperature Range |
-40°C – 85°C (-40°F – 185°F) |
Operating Relative Humidity Range |
10% ~ 85% (non-condensing) |
Non-Operating Relative Humidity Range |
10% ~ 95% (non-condensing) |
Reviews
There are no reviews yet.