Sale!

Tripp Lite B126-2A0 2-Port HDMI Over Cat5 Cat6 Audio Video Extender Remote Unit

$153.61

40 in stock

SKU: B126-2A0 Category:
Key Features

  • Manufacturer Part Number: B126-2A0
  • Connectivity Technology: Wired
  • Number of Output Devices Supported: 2
  • Maximum Operating Distance: 200 ft
  • Graphics Modes: Full HD
  • Maximum Video Resolution: 1920 x 1080
  • Network (RJ-45): Yes
  • HDMI Out: Yes
  • Number of Network (RJ-45) Ports: 1
  • Number of HDMI Outputs: 2
  • Media Type Supported: Twisted Pair
  • Twisted Pair Cable Standard: Category 6
  • Color: Black
  • Receiver Height: 1″
  • Receiver Width: 2.50″
  • Receiver Depth: 3.60″
  • Form Factor:
    • Rack-mountable
    • Wall Mountable
    • Pole-mountable
  • Package Contents:
    • HDMI Over Cat5 Active Extender 2-Port Remote Unit
    • Screwdriver For Adjustment Of Equalization
    • Mounting Hardware
    • External Power Supply (Input: 100-240V)
  • Environmentally Friendly: Yes
  • Environmental Certification: RoHS
  • Country of Origin: Taiwan
  • TAA Compliant: Yes
  • Limited Warranty: 1 Year

Package Contents

  • HDMI Over Cat5 Active Extender 2-Port Remote Unit
  • Screwdriver For Adjustment Of Equalization
  • Mounting Hardware
  • External Power Supply (Input: 100-240V)

Overview
The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite’s B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It’s ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

The receiver uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).

The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).

In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

Features

Extends High-Definition Signals

  • Works in tandem with Tripp Lite’s B126-002 or B126-004 transmitter unit
  • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
  • Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
  • Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)

Supports the Latest Video and Audio Resolutions

  • Works with all operating systems and HDMI video sources
  • Supports HD resolutions up to 1080p (60 Hz)
  • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter
  • Supports 24-bit True Color (8 bits per channel) and HDCP
  • Built-in equalization control lets you adjust the image on the local monitor

Easy to Set Up and Use

  • Plug-and-play engineering-no software or drivers to download and install
  • Connects quickly to monitors with HDMI cable, such as Tripp Lite’s P568-Series
  • LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
  • Included mounting hardware lets you install the unit on a wall, rack or pole

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Description

General Information
Manufacturer: Tripp Lite
Manufacturer Part Number: B126-2A0
Manufacturer Website Address: http://www.tripplite.com
Brand Name: Tripp Lite
Product Model: B126-2A0
Product Name: B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver
Product Type: Video Extender Receiver
Technical Information
Connectivity Technology: Wired
Number of Output Devices Supported: 2
Maximum Operating Distance: 200 ft
Video
Graphics Modes: Full HD
Maximum Video Resolution: 1920 x 1080
Interfaces/Ports
Network (RJ-45): Yes
HDMI Out: Yes
Number of Network (RJ-45) Ports: 1
Number of HDMI Outputs: 2
Media & Performance
Media Type Supported: Twisted Pair
Twisted Pair Cable Standard: Category 6
Physical Characteristics
Color: Black
Receiver Height: 1″
Receiver Width: 2.50″
Receiver Depth: 3.60″
Form Factor:

  • Rack-mountable
  • Wall Mountable
  • Pole-mountable

Miscellaneous
Package Contents:

  • HDMI Over Cat5 Active Extender 2-Port Remote Unit
  • Screwdriver For Adjustment Of Equalization
  • Mounting Hardware
  • External Power Supply (Input: 100-240V)

Environmentally Friendly: Yes
Environmental Certification: RoHS
Country of Origin: Taiwan
TAA Compliant: Yes
Warranty
Limited Warranty: 1 Year

Additional information

Weight 1.2 lbs
Dimensions 1.6 × 7 × 6.1 in
Condition

New

UPC

37332180728

MPN

B126-2A0

Product Type

Maximum Operating

200 ft

Number of Network

1

Media Type Supported

Twisted Pair

Number of Output

2

TAA Compliant

Yes

Color

Black

Connectivity

Wired

Brand

Form Factor

Pole-mountable

Reviews

There are no reviews yet.

Be the first to review “Tripp Lite B126-2A0 2-Port HDMI Over Cat5 Cat6 Audio Video Extender Remote Unit”

Your email address will not be published.