Mfr Part # |
SYS-1018D-73MTF |
Motherboard |
Super X10SL7-F |
CPU |
Socket H3 (LGA 1150) |
Memory Capacity |
4x 240-pin DDR3 DIMM slots; Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
Memory Type |
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
8GB, 4GB, 2GB, 1GB |
Memory Voltage |
1.5 V, 1.35 V |
Error Detection |
Corrects single-bit errors; Detects double-bit errors (using ECC memory) |
Chipset |
Intel® C222 Express PCH |
SATA |
SATA3 (6Gbps) w/ RAID 0, 1; SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 |
SAS |
SAS2 (6Gbps) via Broadcom 2308 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC with 10/100/1000Mbps |
Network Controllers |
Intel® i210AT dual port GbE Controllers; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI) |
VGA |
ASPEED AST2400 BMC |
SATA |
2x SATA3 (6Gbps) ports; 4x SATA2 (3Gbps) ports; SATA DOM Power Connector |
SAS |
8x SAS2 (6Gbps) ports |
LAN |
2x RJ45 Gigabit Ethernet LAN ports; 1x RJ45 Dedicated IPMI LAN port |
USB |
4x USB 2.0 ports |
VGA |
1x VGA port |
Serial Port / Header |
2x COM ports (1 rear, 1 header) |
Voltage |
Monitors for CPU Cores,; +12V, +3.3V, +5V,; +5V Standby, VBAT, HT, Memory, Chipset Voltages.; 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN |
Total of 5 fan headers supporting up to 5 fans; Five 4-pin fan headers; 5x fans with tachometer status monitoring; Status monitor for speed control; Status monitor for on/off control; Support 3-pin fans (w/o speed control); Low noise fan speed control; Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment; CPU thermal trip support; FC temperature sensing logic; Thermal Monitor 2 (TM2) support; PECI |
LED |
CPU / System Overheat LED; +5V Standby alert LED |
Other Features |
Chassis intrusion detection; Chassis intrusion header |
Form Factor |
1U Rackmount |
Model |
|
Height |
1.7″ (43mm) |
Width |
17.2″ (437mm) |
Depth |
19.98″ (507mm) |
Weight |
Gross Weight: 30.4 lbs (13.8 kg); Net Weight: 17.6 lbs (8 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power LED; Hard drive activity LED; 2x Network activity LEDs; System Overheat LED |
PCI-Express |
1x PCI-E 3.0 x8 (in x16) Full-height slot |
Hot-swap |
8x 2.5″ Hot-swap SAS2/SATA3 HDD bays |
Peripheral Bay |
Slim optical drive (optional) |
Fans |
3x 40x28mm 4-pin PWM Cooling Fans; Optional fans to cool add-on cards |
AC Voltage |
100-240 V, 50-60 Hz, 4.5 Amp max |
+5V |
18 Amp |
+5V standby |
3 Amp |
+12V |
27 Amp @ 100-180Vac,; 31 Amp @ 180-240 Vac |
-12V |
0.5 Amp |
+3.3V |
15 Amp |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
DMI 2.3; PCI 2.3; ACPI 1.0 / 2.0; USB Keyboard support; SMBIOS 2.3 |
Software |
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support; Watch Dog; NMI |
Power Configurations |
ACPI / ACPM Power Management; Main Switch Override Mechanism; Power-on mode for AC power recovery; Internal/External modem ring-on |
RoHS |
RoHS2 (2011/65/EU) Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.