Supermicro SYS-5018A-AR12L | 5018A-AR12L Atom C2750 1U SoC 64GB 2xGbE 12×3.5 SAS/SATA 1xPCIe R400W Embedded Virtualization Network Appliance Storage Server
Key Features
- Single socket FCBGA 1283 supports Intel® Atom® processor C2750
- System on Chip
- 12x 3.5″ Hot-swap HDD bays
- Up to 64GB Unbuffered ECC/non-ECC DDR3 1600MHz in 4x DIMM slots
- 1x PCI-E 2.0 x4 (in x8, LP, HL)
- Dual GbE LAN ports with SoC
- Integrated IPMI 2.0 and KVM with Dedicated LAN
- I/O ports: IPMI, 2x GbE, VGA
- 400W High-efficiency redundant short depth Power Supplies
- Product Type: Embedded Server Barebone (chassis, motherboard, embedded CPU, power supply)
- Manufacturer Part Number: SSG-5018A-AR12L
For complete system configuration with CPU, memory, hard drive etc, please select a Dihuni OptiReady model below (if listed) or use ‘Request Quote’ or contact us by email or phone.
Supermicro Embedded Systems Featuring Intel Atom® C2000 Series Processor
Based on the low-power Silvermont microarchitecture, Intel Atom® C2000 family extends the scalability of Intel® architecture into smaller footprints, dense communications, and intelligent systems applications. This product family offers a range of multi-core processing capabilities (from two cores to eight cores) and features high levels of I/O and acceleration integration, resulting in a scalable, single-chip system-on-chip (SoC). Based on the 22-nanometer process technology with 3D tri-gate transistors, the product family provides optimal performance per watt, addressing the needs of thermally constrained solutions, such as entry to midrange branch office routers, security appliances, network access, communications servers, small cells, control plane processing, and storage. When paired with the Intel® Data Plane Development Kit (Intel® DPDK), this platform improves packet processing speeds to handle increased network traffic data rates and associated control and signaling infrastructure requirements.
“Supermicro is expanding our Embedded Building Blocks with a new IoT gateway product that provides complete edge-to-cloud solutions for data aggregation and analytics. The addition of this new class of device to our embedded server and storage solutions provides maximum flexibility to configure scalable computing infrastructure optimized for enterprise, commercial and industrial automation applications.”
Charles Liang, President and CEO of Supermicro
Server Systems Management
Supermicro Server Manager (SSM) provides capabilities to monitor the health of server components including memory, hard drives and RAID controllers. It enables the datacenter administrator to monitor and manage power usage across all Supermicro servers allowing users to maximize their CPU payload while mitigating the risk of tripped circuit. Firmware upgrades on Supermicro servers became easier now with a couple of clicks. Administrators can now mount an ISO image on multiple servers and reboot the servers with those images. The tool also provides pre-defined reports and many more features that will make managing Supermicro servers simpler. Download the SSM_brochure for more info or download Supermicro SuperDoctor® device monitoring and management software.
Technical Specifications
| Mfr Part # |
SSG-5018A-AR12L |
| Motherboard |
Super A1SA7-2750F |
| CPU |
Intel® Atom® Processor C2750; CPU TDP 20W (8-Core); FCBGA 1283; System-on-Chip |
| Memory Capacity |
4x 240-pin DDR3 DIMM slots; Supports up to 64GB DDR3 ECC or non-ECC UDIMM memory |
| Memory Type |
1600/1333MHz ECC DDR3 SDRAM, 204-pin gold-plated DIMMs |
| DIMM Sizes |
16GB, 8GB, 4GB, 2GB |
| Memory Voltage |
1.5 V, 1.35 V |
| Chipset |
Socket on Chip |
| SAS/SATA |
SoC controller for 1 SATA3 (6Gbps) port; Broadcom 2116 SW controller for 16 SATA3 ports, SATA3 or SAS2 with IT mode |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; Nuvoton WPCM450 BMC |
| Network Controllers |
Dual LAN w/ SoC, I354 Built in LAN GbE MACs; Virtual Machine Device Queues reduce I/O overhead; Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201F PHY (dedicated IPMI) |
| VGA |
ASPEED AST2400 BMC |
| LAN |
2 RJ45 GbE LAN ports; 1 RJ45 Dedicated IPMI LAN port |
| USB |
3 USB 2.0 ports (2 rear, 1 Type A) |
| DOM |
1x SATA DOM (Disk on Module) power connector for OS drive |
| VGA |
1 VGA port |
| Form Factor |
1U Rackmount |
| Model |
|
| Height |
1.7″ (43mm) |
| Width |
17.2″ (437mm) |
| Depth |
32″ (813mm) |
| Gross Weight |
38 lbs (16.5kg) |
| Buttons |
Power On/Off button |
| LEDs |
Network activity LEDs |
| PCI-Express |
1x PCI-E 2.0 x4 (in x8, Low-profile, Half-height) slot |
| Internal |
12x 3.5″ Hot-swap HDD bays |
| Fans |
6x 40x28mm PWM cooling fans |
| AC Input |
100-240V, 50-60Hz, 6-3A |
| DC Output |
+5V standby: 3A; +12V: 33A |
DC Output
With Power Distributor |
+5V: 25A; +3.3V: 25A; -12V: 0.6A |
| BIOS Type |
16MB SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
DMI 2.3; PCI 2.3; ACPI 1.0 / 2.0; USB Keyboard support; SMBIOS 2.3 |
| RoHS |
RoHS Compliant |
| Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.