Mfr Part # |
SYS-5018D-MTLN4F |
Motherboard |
Super X10SLM+-LN4F |
CPU |
Socket H3 (LGA 1150) |
Memory Capacity |
4x 240-pin DDR3 DIMM slots; Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
Memory Type |
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
8GB, 4GB, 2GB, 1GB |
Memory Voltage |
1.5 V |
Error Detection |
Corrects single-bit errors; Detects double-bit errors (using ECC memory) |
Chipset |
Intel® C224 PCH chipset |
SATA |
SATA3 (6Gbps) w/ RAID 0, 1, 5, 10; SATA2 (3Gbps) w/ RAID 0, 1; SATA DOM Power Connector |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC with 10/100/1000Mbps |
Network Controllers |
Intel® i210AT Controllers; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI) |
VGA |
ASPEED AST2400 BMC |
Serial ATA |
4x SATA3 (6Gbps) ports; 2x SATA2 (3Gbps) ports; SATA DOM Power Connector |
LAN |
4x RJ45 GbE LAN ports; 1x RJ45 Dedicated IPMI LAN port |
USB |
4x USB 3.0 ports (2 rear, 1 Type-A, 1 via header); 6x USB 2.0 ports (2 rear, 4 via header) |
VGA |
1x VGA port |
Serial Port / Header |
2 COM ports (1 rear, 1 header) |
Voltage |
Monitors for CPU Cores,; 12V, +3.3V, +5V,; +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.; 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN |
Total of Five 4-pin fan headers supporting up to 5 fans; 5x fans with tachometer status monitoring; Status monitor for speed control; Status monitor for on/off control; Support 3-pin fans (w/o speed control); Low noise fan speed control; Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment; CPU thermal trip support; FC temperature sensing logic; Thermal Monitor 2 (TM2) support; PECI |
LED |
CPU / System Overheat LED; +5V Standby alert LED |
Other Features |
Chassis intrusion detection; Chassis intrusion header |
Form Factor |
1U Rackmount |
Model |
|
Height |
1.7″ (43mm) |
Width |
17.2″ (437mm) |
Depth |
19.8″ (503mm) |
Weight |
Gross Weight: 30.4 lbs (13.8 kg); Net Weight: 17.6 lbs (8 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power LED; Hard drive activity LED; 4x Network activity LEDs; System Overheat LED |
Ports |
2x USB ports; 1x Serial COM Port |
PCI-Express |
1x PCI-E 3.0 x16 Full-height slot |
Hot-swap |
4x 3.5″ Hot-swap SATA3 HDDs w/ RAID |
Peripheral Bay |
Slim optical drive (optional) |
Fans |
4x 4cm 12,500 RPM PWM fans; Optional fans to cool add-on cards |
AC Voltage |
100-240 V, 50-60 Hz, 4.2-1.8 Amp |
+5V |
18 Amp |
+5V standby |
3 Amp |
+12V |
29 Amp |
+3.3V |
15 Amp |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
DMI 2.3; PCI 2.3; ACPI 1.0 / 2.0; USB Keyboard support; SMBIOS 2.3 |
RoHS |
RoHS2 (2011/65/EU) Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.