Supermicro SYS-2029BT-HNR | 2029BT-HNR BigTwin 2U X11 Skylake 4 Nodes with 2S Scalable SP Xeon 3TB 6 x 2.5 HSNVMe R2200W Ultra Low Latency Storage Server
Key Features
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
- Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s
- Up to 3TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 24 DIMM slots; Supports Intel Optane Memory NVDIMM
- 2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking) Note: must bundle with Network card
- IPMI 2.0 KVM with dedicated LAN
- 6 Hot-swap 2.5″ NVMe drive bays; total up to 24x 2.5″Hot-swap NVMe drives
- Video via Aspeed AST2500 BMC
- 4 Heavy duty 8cm PWM fans with air shroud
- 2200W Redundant Power Supplies Titanium Level (96%)
- Product Type: Server Barebone (chassis, motherboard power supply); sold only as complete system
- Manufacturer Part Number: SYS-2029BT-HNR
X11 Servers Featuring New Intel Skylake Scalable Xeon® Processors
Supermicro’s new X11 servers are engineered to unleash the full performance and rich feature sets on the new Intel® Xeon® Scalable processor family, supporting more cores and higher TDP envelopes of 205 watts and higher, increased number of memory channels and higher bandwidth, more PCI-E 3.0 lanes, 100G/40G/25G/10G Ethernet, 100G EDR InfiniBand (on select servers) and integrated Intel® Omni-Path Architecture networking fabrics. The elevated compute performance, density, I/O capacity, and efficiency are coupled with industry’s most comprehensive support for NVMe NAND Flash and Intel® Optane™ SSDs for unprecedented application responsiveness and agility. For exact sever specifications, please see highlights below and also refer to detailed technical specifications.
“At Supermicro, we understand that customers need the newest technologies as early as possible to drive leading performance and improved TCO. With the industry’s strongest and broadest product line, our designs not only take full advantage of Xeon Scalable Processors’ new features such as three UPI, faster DIMMs and more core count per socket, but they also fully support NVMe through unique non-blocking architectures to achieve the best data bandwidth and IOPS. For instance, one Supermicro 2U storage server can deliver over 16 million IOPS!”
“We are excited to preview our X11 Ultra, TwinPro™, BigTwin™, SuperBlade® and many more new designs based on the new Intel® Xeon® Processor Scalable Family processors with CPUs that can provide up to 3.9x higher virtualized throughput,”
Charles Liang, President and CEO of Supermicro
Server Systems Management
Supermicro Server Manager (SSM) provides capabilities to monitor the health of server components including memory, hard drives and RAID controllers. It enables the datacenter administrator to monitor and manage power usage across all Supermicro servers allowing users to maximize their CPU payload while mitigating the risk of tripped circuit. Firmware upgrades on Supermicro servers became easier now with a couple of clicks. Administrators can now mount an ISO image on multiple servers and reboot the servers with those images. The tool also provides pre-defined reports and many more features that will make managing Supermicro servers simpler. Download the SSM_brochure for more info or download Supermicro SuperDoctor® device monitoring and management software.
Technical Specifications
Mfr Part # |
SYS-2029BT-HNR |
CPU |
Dual Socket P (LGA 3647); Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s; Support CPU TDP 70-205W* with IVR |
Cores |
Up to 28 Cores with Intel® HT Technology |
Memory Capacity |
24 DIMM slots; Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz |
Memory Type |
2666/2400/2133MHz ECC DDR4 SDRAM |
Chipset |
Intel® C621 chipset |
Network |
Must bundle with at least one SIOM network card |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Video |
ASPEED AST2500 BMC |
LAN |
1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports (rear) |
Video |
1 VGA port |
DOM |
1 SuperDOM (Disk on Module) port |
BIOS Type |
AMI 32Mb SPI Flash ROM |
Software |
Intel® Node Manager; IPMI 2.0; KVM with dedicated LAN; SSM, SPM, SUM; SuperDoctor® 5; Watch Dog |
Power Configurations |
ACPI / APM Power Management |
CPU |
Monitors for CPU Cores, Chipset Voltages, Memory.; 4+1 Phase-switching voltage regulator |
FAN |
Fans with tachometer monitoring; Status monitor for speed control; Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment; Thermal Control for 8x fan connectors |
Form Factor |
2U Rackmount |
Model |
CSE-217BHQ+-R2K22BP2 |
Width |
17.25″ (438mm) |
Height |
3.47″ (88mm) |
Depth |
28.5″ (724mm) |
Package |
26.4″ (H) x 11.2″ (W) x 39.8″ (D) |
Weight |
Gross Weight: 85 lbs (38.6kg); Net Weight: 54.5 lbs (24.7 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; UID button |
LEDs |
Power status LED; HDD activity LED; Network activity LEDs; Universal Information (UID) LED |
PCI-Express |
2 PCI-E 3.0 (x16) Low-profile slots; 1 SIOM card support
(must bundle with network card) |
Hot-swap |
6 Hot-swap 2.5″ NVMe drive bays, total up to 24x 2.5″Hot-swap NVMe drives |
Fans |
4 Heavy duty 8cm PWM fans with air shroud |
Total Output Power |
1200W/1800W/1980W/2090/2200W |
Dimension
(W x H x L) |
45 x 40 x 480 mm |
Input |
100-127Vac / 50-60Hz (1200W); 200-220Vac / 50-60Hz (1800W); 220-230Vac / 50-60Hz (1980W); 230-240Vac / 50-60Hz (2090W)
For TUV/CB/others safety rating only; 180-220Vac / 50-60Hz (2090W)
For UL/cUL safety rating only; 220-240Vac / 50-60Hz (2200W) |
+12V |
Max: 100A / Min: 0A (100-127Vac); Max: 150A / Min: 0A (200-220Vac); Max: 165A / Min: 0A (220-230Vac); Max: 174.17A / Min: 0A (230-240Vac); Max: 174.17A / Min: 0A (180-220Vac); Max: 183.33A / Min: 0A (220-240Vac) |
12Vsb |
Max: 2.1A / Min: 0A |
Output Type |
Backplanes (connector) |
Certification |
UL/cUL/CB/BSMI/CE/CCC; Titanium Level |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F); Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F); Operating Relative Humidity:
8% to 90% (non-condensing); Non-operating Relative Humidity:
5% to 95% (non-condensing) |
Reviews
There are no reviews yet.