Mfr Part # |
SYS-6028R-TDWNR |
Super X10DDW-iN |
Super X10DDW-iN |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 145W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 2TB; ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® i350 Dual Port Gigabit Ethernet; Virtual Machine Device Queues reduce I/O overhead; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8211E PHY (dedicated IPMI) |
Video |
ASPEED AST2400 BMC |
SATA |
8x SATA3 (6Gbps) ports; I-SATA 4 & I-SATA 5 support SATA DOM |
NVMe |
4x Internal NVMe ports |
LAN |
2x RJ45 Gigabit Ethernet LAN ports; 1x RJ45 Dedicated IPMI LAN port |
USB |
3x USB 3.0 ports (2 rear, 1 Type A); 4x USB 2.0 ports (2 rear, 2 headers) |
Video |
1x VGA port |
Serial Port / Header |
1x COM port (header) |
DOM |
2x Super; (Disk on Module) ports |
Software |
IPMI 2.0; Intel® Node Manager; SSM; Watch Dog |
Power Configurations |
ACPI Power Management; Power-on mode for AC power recovery |
Form Factor |
2U Rackmount |
Width |
17.2″ (437mm) |
Height |
3.5″ (89mm) |
Depth |
25.5″ (648mm) |
Package |
26.7″ (W) x 11.4″ (H) x 34.5″ (L) |
Weight |
64 lbs (29.0 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power status LED; HDD activity LED; 2x Network activity LEDs; Universal Information (UID) LED; Power fail LED |
PCI-Express |
1 PCI-E 3.0 x16 (FHHL) slot; 2 PCI-E 3.0 x8 (FHHL) slots; 1 PCI-E 3.0 x8 (LP) slot |
Hot-swap |
8x 3.5″ Hot-swap SATA3 Drive Bays; 4x 2.5″ NVMe Drive Bays |
Fans |
3x 8cm fans with optimal fan speed control |
AC Input |
100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output |
+5V standby: 4A; +12V: 75A |
With Power Distributor |
+5V: 45A; +3.3V: 24A; -12V: 0.6A |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; PCI 2.2; ACPI 1.0 / 2.0 / 3.0 / 4.0; BIOS resuce hot keys; USB Keyboard support; SMBIOS 2.3; UEFI |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 5°C to 40°C (41°F to 104°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.