Mfr Part # |
SYS-7048A-T |
Motherboard |
Super X10DAi |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 160W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 2TB; ECC 3DS LRDIMM, 512GB ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
Network Controllers |
Intel® i210 Dual Port Gigabit Ethernet; Virtual Machine Device Queues reduce I/O overhead; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Audio |
RealTek ALC888 7.1 High Definition Audio with S/PDIF header |
SATA |
10 SATA3 (6Gbps) ports |
LAN |
2 RJ45 Gigabit Ethernet LAN ports |
USB |
6 USB 3.0 ports (4 rear + 2 via header); 5 USB 2.0 ports (2 rear + 2 via header + 1 Type A) |
Audio |
7.1 HD Audio with optical S/PDIF |
DOM |
2 DOM (Disk on Module) power connectors |
TPM |
1 TPM 1.2 20-pin Header |
PCI-Express |
3 PCI-E 3.0 x16 slots; 2 PCI-E 3.0 x8 slots; 1 PCI-E 2.0 x4 (in x8) slot supports Thunderbolt 2.0 AIC |
BIOS Type |
128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; PCI 2.3; ACPI 1.0 / 2.0 / 3.0 / 4.0; USB Keyboard support; SMBIOS 2.7.1; UEFI 2.3.1 |
Form Factor |
4U Rackmountable / Tower; Optional Rackmount Kit |
Model |
|
Height |
17.8″ (452mm) |
Width |
7.0″ (178mm) |
Depth |
25.5″ (648mm) |
Gross Weight |
71 lbs (32.2 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power LED; Hard drive activity LED; 2 Network activity LEDs; System Overheat / Fan Fail LED |
Ports |
2 front USB 3.0 Ports |
Hot-swap |
8x 3.5″ Hot-swap SAS/SATA Drive Trays |
Peripheral Bay(s) [90o Rotatable] |
3x 5.25″ Drive Bays |
Fans |
2x 2800 RPM Fans; 1x 2700 RPM Fan |
AC Input |
1000W: 100-114.9 V, 50-60 Hz, 12 Amp; 1200W: 114.9-240 V, 50-60 Hz, 12-8 Amp |
DC Output
1000W max
1200W max |
+3.3V / +5V / +12V / -12V / +5VSB; 20A / 20A / 83A / 0.3A / 3A; 20A / 20A / 99A / 0.3A / 3A |
Note: |
Max. continuous combined load on +3.3V and +5V output shall not exceed 120W. |
CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.; 6-Phase-switching voltage regulator |
FAN |
Total of three fan headers supporting up to 8 fans; Three 4-pin fan headers; 3 fans with tachometer status monitoring; Support 3-pin fans (w/o speed control); Low noise fan speed control (4-pin fan only) |
Temperature |
Monitoring for CPU and chassis environment; Thermal Control for 8x fan connectors; PECI |
Other Features |
Chassis intrusion detection; Chassis intrusion header |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.