Mfr Part # |
SYS-7048R-C1RT |
Motherboard |
Super X10DRH-CT |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family
(up to 145W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 2TB; ECC 3DS LRDIMM, 512 ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
SAS |
Broadcom 3108 SAS3 (12Gbps) controller;; HW RAID 0, 1, 5, 6, 10, 50, 60 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® X540 10GBase-T; Virtual Machine Device Queues reduce I/O overhead; Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI) |
Video |
ASPEED AST2400 BMC |
SATA |
8x SATA3 (6Gbps) ports |
SAS |
8x SAS3 (12Gbps) ports |
LAN |
2x RJ45 10GBase-T ports; 1x RJ45 Dedicated IPMI LAN port |
USB |
2x USB 3.0 ports (2 rear); 4x USB 2.0 ports (2 rear, 2 front); 1x USB Type A |
Video |
1x VGA port |
Serial Port / Header |
1x COM/Serial |
DOM |
2x Super; (Disk on Module) ports |
PCI-Express |
1x PCI-E 3.0 x16 (Full-height, Full-length); 6x PCI-E 3.0 x8 (Full-height, Full-length) |
BIOS Type |
128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; DMI 2.2; ACPI 1.0 / 2.0; USB Keyboard support; SMBIOS 2.3; UEFI |
Form Factor |
4U Rackmountable / Tower; Optional Rackmount Kit |
Model |
|
Height |
17.2″ (437mm) |
Width |
7.0″ (178mm) |
Depth |
25.5″ (648mm) |
Package |
24″ (H) x 14″ (W) x 26.5″ (D) |
Weight |
Net Weight: 56.5 lbs (25.6 kg); Gross Weight: 74 lbs (33.57 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power LED; Hard drive activity LED; 2x Network activity LEDs; System Overheat LED; Power Fail LED |
Ports |
2x USB Ports |
Hot-swap |
8x 3.5″ Hot-swap SATA3 drive trays; 8x 2.5″ Hot-swap SAS3 drives in mobile rack |
Peripheral Bay |
1x 5.25″ drive bay (optional devices) |
Fans |
3x 8cm Hot-swap redundant PWM Cooling Fans; 2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud |
AC Input |
100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output |
4 Amp @ +5V standby; 75 Amp @ +12V |
CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.; 6-Phase-switching voltage regulator |
FAN |
Total of five fan headers supporting up to 5 fans; 5x fans with tachometer status monitoring; Status monitor for speed control; Pulse Width Modulated (PWM) fan connectors |
Temperature |
Monitoring for CPU and chassis environment; CPU thermal trip support; Thermal Control for 5x fan connectors; Thermal Monitor 2 (TM2) support; PECI |
LED |
System info. LED:; UID indicator, fan fail/System Overheat; Suspend static indicator LED; UID/Remote LED |
Other Features |
Chassis intrusion detection; Chassis intrusion header |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.