Mfr Part # |
SYS-6028R-T |
Motherboard |
Super X10DRi |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 145W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 2TB; ECC 3DS LRDIMM, 512GB ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® i350 Dual Port Gigabit Ethernet; Virtual Machine Device Queues reduce I/O overhead; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics |
ASPEED AST2400 BMC |
Serial ATA |
6x SATA3 (6Gbps) ports; 2x SATA3 (6Gbps) ports onboard; 2x SATA3 powered ports that support SATA DOM |
LAN |
2x RJ45 Gigabit Ethernet LAN ports; 1x RJ45 Dedicated IPMI LAN port |
USB |
Rear USB: 2x USB 3.0 + 2x USB 2.0; USB Header: 2x 3.0, 4x 2.0, 1x Type A |
VGA |
1x VGA port |
Serial Port / Header |
1x COM Port |
Software |
Watch Dog; NMI, SPM, SUM; IPMI 2.0; Intel Node Manager |
Power Configurations |
ACPI / APM Power Management; Power-on mode for AC power recovery |
Form Factor |
2U Rackmount |
Width |
19″ (490mm) |
Height |
3.5″ (89mm) |
Depth |
27″ (680mm) |
Package |
9.7″ (H) x 24″ (W) x 28″ (D) |
Weight |
Net Weight: 31 lbs (14.2 kg); Gross Weight: 51.5 lbs (23.6 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button; UID button |
LEDs |
Power status LED; HDD activity LED; 2x Network activity LEDs; System information (overheat/UID) LED |
PCI-Express |
3x PCI-E 3.0 x16 (Low-profile); 3x PCI-E 3.0 x8 (Low-profile) |
Hot-swap |
6x 3.5″ Hot-swap SATA HDD trays |
Fans |
4x 80cm hot-swap redundant PWM cooling fans |
AC Input |
100 – 140V, 8-5.2A 180-240V 4.2-3.1A, 50-60Hz |
+5V |
30 Amp |
+5V standby |
4 Amp |
+12V |
100-140Vac 49Amp; 180-240Vac 54Amp |
-12V |
0.5 Amp |
+3.3V |
25 Amp |
BIOS Type |
128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; PCI 2.3; ACPI 1.0 / 2.0 / 3.0 / 4.0; USB Keyboard support; SMBIOS 2.7.1; UEFI 2.3.1 |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.