Mfr Part # |
SYS-6028TP-DNCFR |
Motherboard |
Super X10DRT-PIBF |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 145W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 2TB; ECC 3DS LRDIMM, 512GB ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
Infiniband |
Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller |
SAS |
Broadcom 3008 SAS3 (12Gbps) controller;; RAID 0, 1, 10 support; Optional SuperCap; Note: In order to support NVMe drives, both CPU socket must be populated |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® i350-AM2 Dual Port Gigabit Ethernet; Virtual Machine Device Queues reduce I/O overhead; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics |
ASPEED AST2400 BMC |
SAS |
6x SAS3 (12Gbps) ports |
LAN |
2x RJ45 Gigabit Ethernet LAN ports; 1x RJ45 Dedicated IPMI LAN port |
Infiniband |
1x external QSFP Infiniband connector |
USB |
2x USB 3.0 ports total (2x rear) |
VGA |
1x VGA port |
Serial Port / Header |
1x Fast UART 16550 port / 1 Header (internal) |
Others |
1x; (full size) and one SATADOM support on the daughter card; 1x; support on the motherboard |
Form Factor |
2U Rackmount |
Model |
|
Width |
17.25″ (438mm) |
Height |
3.47″ (88mm) |
Depth |
30.5″ (774mm) |
Weight |
Gross Weight: 85 lbs (38.6kg); Net Weight: 66 lbs (29.9 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; UID button |
LEDs |
Power status LED; HDD activity LED; 2x Network activity LEDs; Universal Information (UID) LED |
PCI-Express |
1x PCI-E 3.0 x16 slot; 1x PCI-E 3.0 x8 slot |
Hot-swap |
6x 3.5″ Hot-swap drive bays:; Up to 4x NVMe + 2x SAS3 or 6x SAS3; Note: NVMe support requires 2 CPUs installed |
Fans |
4x 8cm heavy duty PWM fans with optimal fan speed control |
Total Output Power |
800W/1600W |
Dimension
(W x H x L) |
76 x 40.4 x 336 mm |
Input |
100-127Vac / 10-7A / 50-60Hz; 200-240Vac / 11-8A / 50-60Hz |
+12V |
Max: 66A / Min: 0A (100-127Vac); Max: 133A / Min: 0A (200-240Vac) |
+5Vsb |
Max: 1A / Min: 0A |
Output Type |
27 Pairs Gold Finger Connector |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; PCI 2.2; ACPI 1.0 / 2.0; USB Keyboard support; SMBIOS 2.3; UEFI |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.