- Manufacturer Part Number: FLUKE789
- Meter Type: Digital
- Measurement Type:
- AC Current
- DC Current
- AC Voltage
- DC Voltage
- Continuity
- Frequency
- Diode Test
- Resistance
- True RMS: Yes
- Maximum AC Voltage Measurement: 1000 V
- Maximum DC Voltage Measurement: 1000 V
- Maximum AC Current Measurement: 30 mA
- Maximum DC Current Measurement: 30 mA
- Maximum Resistance Measurement: 40 Mega Ohm
- Maximum Frequency Measurement: 20 kHz
- Height: 2″
- Width: 3.9″
- Depth: 8″
- Weight (Approximate): 1.34 lb
- Package Contents:
- Fluke 789 ProcessMeter
- 1 x Set) AC175 Alligator Clips
- 1 x Set) TL71 Test Lead Set
- 4 x AA 1.5 V Alkaline Batteries (installed)
- Quick Reference Guide
- Limited Warranty: 3 Year
Package Contents
- Fluke 789 ProcessMeter
- 1 x Set) AC175 Alligator Clips
- 1 x Set) TL71 Test Lead Set
- 4 x AA 1.5 V Alkaline Batteries (installed)
- Quick Reference Guide
Overview
Fluke 789 ProcessMeter™ doubles your troubleshooting power
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.
The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Do a lot more while carrying a lot less
The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.
Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.
Accuracy
This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.
