- Manufacturer Part Number: 27030148
- Protection Type:
- Surge Protection
- Over Current
- Input Voltage:
- 24 V DC
- 48 V DC
- Maximum Output Voltage: 54 V DC
- Maximum Input Current: 4.20 A
- Maximum Output Power: 75 W
- Color Family: Gray
- Product Color: Gray
- Form Factor: Din Rail
- Height: 5.1″
- Width: 1.2″
- Depth: 4.7″
- Weight (Approximate): 11.45 oz
- Certifications & Standards:
- IEEE 802.3bt
- IEEE 802.3at
- IEEE 802.3af
- EMC Directive 2014/30/EU
- CE-compliant
- EN 61000-4-2
- EN 61000-4-3
- EN 61000-4-4
- EN 61000-4-6
- IEC 61643-21
- cULus Listed
- cUL Listed
- UL Listed
- Environmentally Friendly: Yes
- Environmental Certification:
- REACH
- China RoHS
Overview
INJ 2100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. In environments vulnerable to voltage surges, it acts as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-2100-T units are protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices.
Generating up to 60 Watts, the INJ-2100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE.
With the INJ-2100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.