Mfr Part # |
SYS-6028U-TRT+ |
Motherboard |
Super X10DRU-i+ |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 160W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
24x 288-pin DDR4 DIMM slots; Up to 3TB; ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Connectivity |
2x 10GBase-T ports via; Intel® X540 10GBase-T; 1x Realtek RTL8211E PHY (dedicated IPMI) |
Graphics |
ASPEED AST2400 BMC |
SATA |
10x SATA3 (6Gbps) ports |
SAS |
12x SAS3 ports support via optional Add-on Card |
LAN |
2x RJ45 10GBase-T LAN ports; 1x RJ45 Dedicated IPMI LAN port |
USB |
5x USB 3.0 ports; (2 rear, 2 onboard header, 1 Type A) |
Video |
1x VGA Connector |
Serial Port / Header |
1x Serial header |
DOM |
2x Super; (Disk on Module) ports |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; PCI 2.3; ACPI 1.0 / 2.0 / 3.0 / 4.0; USB Keyboard support; SMBIOS 2.7.1; UEFI 2.3.1 |
Software |
Intel® Node Manager 3.0; Watch Dog; NMI; and; Optional IPMI 1.5 / 2.0 |
Power Configurations |
ACPI Power Management; Power-on mode for AC power recovery |
Form Factor |
2U Rackmount |
Width |
17.2″ (437mm) |
Height |
3.5″ (89mm) |
Depth |
28.46″ (723mm) |
Weight |
Net Weight: 36 lbs (16.4 kg); Gross Weight: 72 lbs (32.7 kg) |
Available Colors |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power status LED; HDD activity LED; 2x Network activity LEDs; System information (overheat/UID) LED |
PCI-Express |
1x PCI-E 3.0 x16 slot (FH, 10.5″ L); 7x PCI-E 3.0 x8 slots; (5x FH, 10.5″ L, 1x LP, 1x Internal LP) |
Hot-swap |
12x Hot-swap 3.5″ Drive Bays:; 10x SATA3 ports by default; Optional drive support: 12x SAS3 |
Fans |
4x 8cm heavy duty PWM fans |
Total Output Power |
800W/1000W |
Dimension
(W x H x L) |
73.5 x 40 x 203 mm |
Input |
100-127Vac / 9.8 – 7A / 50-60Hz; 200-240Vac / 7 – 5A / 50-60Hz |
+12V |
Max: 66.7A / Min: 0A (100-127Vac); Max: 83A / Min: 0A (200-240Vac) |
12Vsb |
Max: 2.1A / Min: 0A |
Output Type |
25 Pairs Gold Finger Connector |
Voltage |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.; 5+1 Phase-switching voltage regulator |
FAN |
8x 4-pin fan headers; Status monitor for speed control; Pulse Width Modulated (PWM) fan connectors |
Temperature |
Support to monitor Supermicro AOC temperatures from IPMI or SD 5; Monitoring for CPU and chassis environment; CPU thermal trip support; Thermal Control for 8x Fan Connectors; Thermal Monitor 2 (TM2) support; PECI |
LED |
Memory DIMM ECC error LEDs; CPU / System Overheat LED; Suspend static indicator LED; UID/Remote UID |
Other Features |
4x 8-pin GPU power connectors; Chassis intrusion detection; Chassis intrusion header; SDDC Support; RoHS |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 5°C to 40°C (41°F to 104°F); Non-operating Temperature:; -40°C to 60°C (-40°F to 140°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.