- Manufacturer Part Number: IMC-750-SSER
- Total Number of Ports: 2
- Network (RJ-45): Yes
- Number of Network (RJ-45) Ports: 1
- Number of SC Ports: 1
- Media Type Supported:
- Twisted Pair
- Optical Fiber
- Fiber Optic Wavelength:
- 1310 nm
- 1550 nm
- Maximum Distance Supported: 24.85 Mile
- Ethernet Technology: Fast Ethernet
- Network Technology:
- 10/100Base-T
- 10/100Base-X
- Form Factor: Hot-swappable
- Height: 4.2″
- Width: 0.8″
- Depth: 2.8″
- Weight (Approximate): 3.88 oz
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
Overview
The IMC-750/751 series are slide-in module Ethernet-to-fiber media converters for the IMC-7xx chassis, which support hot-swappable and easy installation. They allow network operators to incorporate multiple fiber types and wavelengths within a network. They can be monitored and controlled via a central site with the IMC-710 SNMP management module by iView, Telnet, or CLI while installed in a IMC-71x series chassis.
Link Fault Pass Through (LFPT) is a diagnostic feature that can enable or disable links to assist end users in troubleshooting a failed segment and configuration control to retain the latest configuration regardless of how the initial configuration was set up. The IMC-750 series can convert a 10/100 ~ 100Mbps copper-to-fiber media rate to auto-negotiation functionality on the twisted pair port for operation, and can fix it at 100Mbps copper-to-fiber with the IMC-751 series.
The IMC-754I-SFP converter is protocol-independent with dual SFP ports which can provide a single conversion between different wavelengths or single-mode and multi-mode fiber, single-mode to single-mode fiber or multi-mode to single-strand single-mode fiber. The SFP port must use an SFP of the same speed while allowing for different fiber types. Additionally, the IMC-754I-SFP is an industrial equipment device. The unit operates in environments that demand extended operating temperatures.
Reviews
There are no reviews yet.