- Manufacturer Part Number: IMC-574I-SFP-PS
- Total Number of Ports: 2
- Network (RJ-45): Yes
- Number of Network (RJ-45) Ports: 2
- Media Type Supported:
- Twisted Pair
- Optical Fiber
- Number of Total Expansion Slots: 2
- Expansion Slot Type: SFP (mini-GBIC)
- Number of SFP Slots: 2
- Ethernet Technology: Gigabit Ethernet
- Network Technology:
- 10/100/1000Base-T
- 1000Base-X
- Power Source: AC/DC
- Form Factor:
- DIN Rail Mountable
- Wall Mountable
- Height: 0.9″
- Width: 3.7″
- Depth: 3.9″
- Weight (Approximate): 15.87 oz
- Package Contents:
- 10/100/1000Mbps 2TX/2SFP Intelligent Media Converter
- AC/DC Adapter, 15W @ 5V DC
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
Package Contents
- 10/100/1000Mbps 2TX/2SFP Intelligent Media Converter
- AC/DC Adapter, 15W @ 5V DC
Overview
The IMC-574I is a value-based, managed Gigabit Ethernet solution that is ideal for use in fiber infrastructure. The IMC-574I comes with two SFP ports and two fixed 10/100/1000Base-T copper ports. There are four distinct DIP switch selectable configurations that feature the IMC-574I to be a 1+1 uplink port revertive mode, a 1+1 uplink protection non-revertive mode, a 4-port Gigabit switch, and a dual copper-to-fiber SFP media/mode converter (two Gigabit fiber media converters in one).
The term “1+1” refers to line protection where identical information is transmitted on two lines. The receiver chooses its communication line based on the revertive or non-revertive configuration. When a fault is detected on the active line, the traffic is switched to the redundant line. In the non-revertive mode, data is not resumed back to the original line unless the backup line fails or is disconnected. Once the original line is no longer in a fault condition, data can be resumed back to the original line.
