- Manufacturer Part Number: 375
- Input Voltage:
- 120 V AC
- 230 V AC
- Maximum Output Voltage: 56 V DC
- Maximum Output Power: 75 W
- Input Ports: 1 10/100/1000Base-T
- Output Ports: 1 10/100/1000Base-T
- Height: 1.8″
- Width: 2.8″
- Depth: 4.8″
- Compatibility:
- PoE VoIP Phones
- PoE WiFi Access Points
- PoE IP Cameras
- PoE Medical Equipment
- PoE Security Locks
- Certifications & Standards:
- IEEE 802.3at
- IEEE 802.3af
- CE
- Environmentally Friendly: Yes
- Environmental Certification: WEEE
Overview
The EnableIT™ 375 75W – 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3AF/AT compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
The 375 75W High powered Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3AF/AT compliant device, the Injector uses 4 wires in a category rated wiring bundle. i.e. CAT5e run required for Gigabit Ethernet.
The Enable-IT 375 75W – 56V Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100?- 200? of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.
