Key Features
- Manufacturer Part Number: I2-IOS-C-U
- Height: 0.6″
- Width: 2.4″
- Weight (Approximate): 2.05 oz
- Country of Origin: United States
Overview
I2-IO Series radios with embedded I/O functions are available only at the board level.
The I2-IOS can operate in one of two modes:
Modbus and wire replacement.
In Modbus mode, the I2-IOS connects as an I/O peripheral to a SCADA network.
For wire replacement (wireless signal replication), the I2-IOS operates as an Endpoint linked to an I2-IOM (Gateway) radio. The enclosure version also includes switchable and protected resistors for convenience when using 4 – 20 mA sensors. The I2-IOS is Class I, Division 2 approved by UL-US and C-UL.
- User-Configurable I/O: Digital and analog
- Up to 65,535 Endpoint radios on a single Modbus network
- Extends range and coverage to other FGR family radios by Endpoint/Repeater operation
- Supply rated to +30 V
- All AIs reported as 16-bit integers or 32-bit floating points
- Pulse counting (32-bit) DIs allow detection of 500 usec.
- Pulses and count to 1000 Hz Active data port allows extension by adding external devices
- Single register access to 16-bit a/d; 2 register access for full 20-bits
- Enhance proportional control by 4 to 20 mA AOs with programmable offsets and comm-loss set points
- DOs control up to 60 W each and have optional pulse-output to protect intermittent rated loads
