- Manufacturer Part Number: B140-1A0
- Connectivity Technology: Wired
- Number of Input Devices Supported: 1
- Number of Output Devices Supported: 1
- Maximum Operating Distance: 200 ft
- Graphics Modes: Full HD
- Maximum Video Resolution: 1920 x 1080
- Network (RJ-45): Yes
- DVI Out: Yes
- Number of Network (RJ-45) Ports: 1
- Number of DVI Outputs: 1
- Media Type Supported: Twisted Pair
- Twisted Pair Cable Standard: Category 6
- Receiver Height: 1″
- Receiver Width: 2.50″
- Receiver Depth: 3.60″
- Package Contents:
- B140-1A0 DVI over Cat5 Active Extender Remote Unit
- Mounting Hardware
- Screwdriver for adjustment of Equalization
- External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
- Owner’s Manual
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
- Country of Origin: Taiwan
- TAA Compliant: Yes
- Limited Warranty: 1 Year
Package Contents
- B140-1A0 DVI over Cat5 Active Extender Remote Unit
- Mounting Hardware
- Screwdriver for adjustment of Equalization
- External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
- Owner’s Manual
Overview
The B140-1A0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite’s N202-Series). The B140-1A0 is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1A0 to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft..
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..
