- Manufacturer Part Number: SM1000RM2UTAA
- Plug/Connector Type: NEMA 5-15P
- Receptacles: 6 x NEMA 5-15R
- Load Capacity: 1000 VA/700 W
- Input Voltage: 110 V AC
- Output Voltage: 120 V AC
- Backup/Run Time (Full Load): 7 Minute
- Typical Battery Recharge Time: 4 Hour
- Height: 3.5″
- Width: 17.5″
- Depth: 13.5″
- Rack Height: 2U
- Form Factor: Rack/Tower
- Weight (Approximate): 35 lb
- Package Contents:
- SmartPro SM1000RM2UTAA 1000 VA Tower/Rack Mountable UPS
- Mounting Hardware for 4 Post Rackmount Installation
- USB Cable
- Serial Cable
- EPO Cable
- PowerAlert unattended shutdown and UPS/Power Monitoring Software
- Instructional Manual with Warranty Information
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
- Country of Origin: Taiwan
- TAA Compliant: Yes
- Limited Warranty: 2 Year
Package Contents
- SmartPro SM1000RM2UTAA 1000 VA Tower/Rack Mountable UPS
- Mounting Hardware for 4 Post Rackmount Installation
- USB Cable
- Serial Cable
- EPO Cable
- PowerAlert unattended shutdown and UPS/Power Monitoring Software
- Instructional Manual with Warranty Information
Overview
Tripp Lite’s SM1000RM2UTAA is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. This intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 17 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts and overvoltages from 83 to 147V. 1000VA/700 watt power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. Includes a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications ports support messaging of detailed UPS operating parameters and line power status. Includes PowerAlert UPS monitoring and unattended shutdown software with management support for an unlimited number of network UPS systems. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. Two year warranty with ,250,000 connected equipment insurance (USA & Canada only).
