- Manufacturer Part Number: SMART3000RM2UN
- Plug/Connector Type: NEMA L5-30P
- Receptacles:
- 1 x NEMA L5-30R
- 8 x NEMA 5-15/20R
- Transfer Time: 5 ms
- Load Capacity: 3000 VA/2250 W
- Input Voltage: 120 V AC
- Output Voltage: 120 V AC
- Backup/Run Time (Full Load): 3.50 Minute
- Typical Battery Recharge Time: 4.50 Hour
- Height: 3.5″
- Width: 17.5″
- Depth: 19.5″
- Rack Height: 2U
- Form Factor: Rack/Tower
- Weight (Approximate): 62.80 lb
- Package Contents:
- SMART3000RM2UN UPS System with Pre-installed WEBCARDLX
- PowerAlert Software CD
- USB Cable
- Serial Cable
- EPO Cable
- 4 Post Installation Kit
- Instruction Manual
- Environmentally Friendly: Yes
- Country of Origin: China
- Limited Warranty: 3 Year
Package Contents
- SMART3000RM2UN UPS System with Pre-installed WEBCARDLX
- PowerAlert Software CD
- USB Cable
- Serial Cable
- EPO Cable
- 4 Post Installation Kit
- Instruction Manual
Overview
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite’s unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.
The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available for free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
