- Manufacturer Part Number: SMX2200XLRT2U
- Plug/Connector Type: IEC 60320 C20
- Receptacles: 8 x IEC 60320 C13
- Transfer Time: 4 ms
- Load Capacity: 2200 VA/1920 W
- Input Voltage: 230 V AC
- Output Voltage: 230 V AC
- Backup/Run Time (Full Load): 5 Minute
- Typical Battery Recharge Time: 4.50 Hour
- Height: 3.5″
- Width: 17.5″
- Depth: 19.5″
- Rack Height: 2U
- Form Factor: Rack/Tower
- Weight (Approximate): 68.75 lb
- Package Contents:
- SMX2200XLRT2U UPS system
- PowerAlert Software with USB, Serial & EPO cabling
- 4 post rackmount installation kit
- Set of 3 C13/C14 power cables
- Instruction manual
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
- Country of Origin: China
- Limited Warranty: 2 Year
Package Contents
- SMX2200XLRT2U UPS system
- PowerAlert Software with USB, Serial & EPO cabling
- 4 post rackmount installation kit
- Set of 3 C13/C14 power cables
- Instruction manual
Overview
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite’s unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional network management card option. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.