- Manufacturer Part Number: SMX3000XLRT2UA
- Plug/Connector Type: IEC 60320 C20
- Receptacles:
- 8 x IEC 60320 C13
- 1 x IEC 60320 C19
- Load Capacity: 3000 VA/2700 W
- Input Voltage: 230 V AC
- Output Voltage: 230 V AC
- Backup/Run Time (Full Load): 3.90 Minute
- Typical Battery Recharge Time: 5 Hour
- Height: 3.5″
- Width: 17.5″
- Depth: 19.5″
- Rack Height: 2U
- Form Factor: Rack/Tower
- Weight (Approximate): 62.80 lb
- Package Contents:
- SMX3000XLRT2UA UPS System
- PowerAlert Software CD
- 4 Post Rackmount Installation Kit
- 3 x C13/C14 Power Cables
- Instruction Manual
- USB Cable
- DB9 Cable
- EPO Cable
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
- Country of Origin: China
- Limited Warranty: 2 Year
Package Contents
- SMX3000XLRT2UA UPS System
- PowerAlert Software CD
- 4 Post Rackmount Installation Kit
- 3 x C13/C14 Power Cables
- Instruction Manual
- USB Cable
- DB9 Cable
- EPO Cable
Overview
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite’s unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.