Mfr Part # |
SYS-1028GQ-TVRT |
Motherboard |
Super X10DGQ |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 145W TDP); Dual Socket R3 (LGA 2011)2 x Intel Xeon E5-2630V4 10Core 2.2GHz CPU Installed |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
GPU |
4 Nvidia Tesla V100 SXM2; NVLINK up to 300GB/s
4 x NVIDIA Tesla V100 SXM2 16GB HBM2 NVLink GPU Installed |
Memory Capacity |
16x 288-pin DDR4 DIMM slots; Up to 512GB; ECC 3DS LRDIMM, 1TB ECC RDIMM
256GB (32GBx8) DDR4-2400 ECC Registered Memory Installed |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB; LRDIMM: 32GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® X540 Dual Port 10GBase-T; Virtual Machine Device Queues reduce I/O overhead; Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Graphics |
ASPEED AST2400 BMC |
SATA |
6 SATA3 (6Gbps) ports |
LAN |
2 RJ45 10GBase-T Ethernet ports
1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports (2 via headers) |
Video |
1 VGA Connector |
Serial Port |
1 Serial header |
BIOS Type |
128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; DMI 2.3; PCI 2.3; ACPI 1.0 / 2.0 / 3.0; USB Keyboard support; SMBIOS 2.7.1; UEFI |
Form Factor |
1U Rackmount |
Model |
|
Height |
1.7″ (43mm) |
Width |
17.2″ (437mm) |
Depth |
35.2″ (894mm); 39.3″ (997mm) with rails |
Package |
24″ (H) x 8″ (W) x 46″ (D) |
Weight |
Net Weight: 45 lbs (15.9 kg); Gross Weight: 58 lbs (21.8 kg) |
Available Color |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power LED; Hard drive activity LED; 2 Network activity LEDs; System Overheat LED / Fan fail LED /; UID LED |
PCI-Express |
3 PCI-E 3.0 x16 slots; 1 PCI-E 3.0 x8 low-profile slot |
Hot-swap |
2x 2.5″ Hot-swap drive bays
1 x 960GB SATA3 6Gb/s,7.0mm,16nm,0.7 DWPD SSD Installed |
Fixed |
2x 2.5″ internal drive bays |
Fans |
7x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control |
Total Output Power |
1000W/1800W/1980W/2000W |
Dimension
(W x H x L) |
73.5 x 40 x 265 mm |
Input |
100-120Vac / 12.5-9.5A / 50-60Hz; 200-220Vac / 10-9.5A / 50-60Hz; 220-230Vac / 10-9.8A / 50-60Hz; 230-240Vac / 10-9.8A / 50-60Hz; 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) |
+12V |
Max: 83.3A / Min: 0A (100-120Vac); Max: 150A / Min: 0A (200-220Vac); Max: 165A / Min: 0A (220-230Vac); Max: 166.7A / Min: 0A (230-240Vac); Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only) |
12Vsb |
Max: 2.1A / Min: 0A |
Output Type |
25 Pairs Gold Finger Connector |
CPU |
Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.; 5 Phase-switching voltage regulator |
FAN |
Total of seven 4-pin PWM fans; 7 fans with tachometer monitoring; Status monitor for speed control; Status monitor for on/off control; Low noise fan speed control |
Temperature |
Monitoring for CPU and chassis environment; CPU thermal trip support; Thermal Control for 8 Fan Connectors; PSU I; C temperature sensing logic; Thermal Monitor 2 (TM2) support; PECI |
LED |
Power Fail / Overheat LED; Suspend-state Indicator LED; UID LED |
Other Features |
SDDC Support |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 30°C (50°F to 86°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.