Mfr Part # |
SYS-2028R-C1R4+ |
Motherboard |
Super X10DRC-LN4+ |
CPU |
Intel® Xeon® processor E5-2600; /
v3 family(up to 145W TDP); Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to; / Up to; Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
Memory Capacity |
24x 288-pin DDR4 DIMM slots; Up to 3TB; ECC 3DS LRDIMM, 768GB ECC RDIMM |
Memory Type |
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM:
32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects single-bit errors |
Chipset |
Intel® C612 chipset |
SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
SAS |
Broadcom 3108 SAS3 (12Gbps) controller;; HW RAID 0, 1, 5, 6, 10, 50, 60 |
IPMI |
Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC |
Network Controllers |
Intel® i350 Gigabit Ethernet; Virtual Machine Device Queues reduce I/O overhead; Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Graphics |
ASPEED AST2400 BMC |
SATA |
10 SATA3 (6Gbps) ports |
SAS |
8 SAS3 (12Gbps) ports; SuperCap option support |
LAN |
4 RJ45 Gigabit Ethernet LAN ports; 1 RJ45 Dedicated IPMI LAN port |
USB |
2 USB 3.0 ports (rear); 4 USB 2.0 ports (2 rear, 2 front); 1 Type A |
Video |
1 VGA Connector |
Serial Port / Header |
2 Fast UART 16550 serial; 2 COM Ports (1 rear, 1 front) |
BIOS Type |
128Mb SPI Flash EEPROM with UEFI BIOS |
BIOS Features |
Plug and Play (PnP); APM 1.2; DMI 2.3; PCI 2.2; ACPI 1.0 / 2.0; USB Keyboard support; Hardware BIOS Virus protection; SMBIOS 2.3; UEFI; RTC (Real Time Clock) Wakeup |
Form Factor |
2U Rackmount |
Height |
3.5″ (89mm) |
Width |
17.2″ (437mm) |
Depth |
24.8″ (630mm) |
Package |
10.5″ (H) x 26.5″ (W) x 38″ (D) |
Weight |
Net Weight: 38.5 lbs (17.5 kg); Gross Weight: 63.5 lbs (28.8 kg) |
Available Color |
Black |
Buttons |
Power On/Off button; System Reset button |
LEDs |
Power LED; Hard drive activity LED; 2 Network activity LEDs; System Overheat LED / Fan fail LED /; UID LED |
PCI-Express |
2 PCI-E 3.0 x16; 3 PCI-E 3.0 x8; 1 PCI-E 2.0 x4 (in x8) |
Hot-swap |
8x 2.5″ and 8x 2.5″ Hot-swap drive bays |
Fans |
3 heavy duty 8cm fans with optimal fan speed control |
AC Input |
100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output |
4 Amp @ +5V standby; 75 Amp @ +12V |
CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.; CPU Core 6-Phase-switching voltage regulator |
FAN |
Total of five 4-pin PWM fans; 5x fans with tachometer monitoring; Status monitor for speed control; Status monitor for on/off control; Low noise fan speed control |
Temperature |
Monitoring for CPU and chassis environment; CPU thermal trip support; Thermal Control for 10x Fan Connectors; PSU I; C temperature sensing logic; Thermal Monitor 2 (TM2) support; PECI |
LED |
Power Fail / Overheat LED; Suspend-state Indicator LED; UID LED |
Other Features |
SDDC Support |
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating Temperature:; 10°C to 35°C (50°F to 95°F); Non-operating Temperature:; -40°C to 70°C (-40°F to 158°F); Operating Relative Humidity:; 8% to 90% (non-condensing); Non-operating Relative Humidity:; 5% to 95% (non-condensing) |
Reviews
There are no reviews yet.