Key Features
- Manufacturer Part Number: FDC10S1B
- Total Number of Ports: 1
- Network (RJ-45): No
- Number of PoE (RJ-45) Ports: No
- Number of PoE+ (RJ-45) Ports: No
- Number of ST Ports: 1
- Media Type Supported: Optical Fiber
- Fiber Mode Supported: Single-mode
- Fiber Optic Wavelength:
- 1550 nm
- 1310 nm
- Maximum Distance Supported: 42.87 Mile
- Fiber Optic Cable Standard: 9/125 µm
- Power Source: Power Supply
- Power Consumption: 2 W
- Plug/Connector Type: Terminal Block
- Form Factor:
- Standalone
- Surface-mountable
- Height: 3.7″
- Width: 4″
- Depth: 1″
- Package Contents:
- Bi-Directional Contact Closure Transceiver
- DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz
- Environmentally Friendly: Yes
- Environmental Certification:
- WEEE
- RoHS
- Country of Origin: United States
- TAA Compliant: Yes
- Limited Warranty: Lifetime
Package Contents
- Bi-Directional Contact Closure Transceiver
- DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz
Overview
The ComNet™ FDC10 Series bi-directional contact closure transceiver provides bi-directional transmission of contact closure over one multimode or single mode optical fiber. The transceiver has a contact input and a 0.5 amp contact output. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.
Reviews
There are no reviews yet.