- Manufacturer Part Number: 1102D-0-09Y
- Total Number of Ports: 2
- Network (RJ-45): Yes
- Number of PoE (RJ-45) Ports: 1
- PoE Port Type: PD
- Number of SC Ports: 1
- SC Port Type: Duplex
- Media Type Supported:
- Twisted Pair
- Optical Fiber
- Fiber Mode Supported: Multi-mode
- Fiber Optic Wavelength: 1310 nm
- Maximum Data Transfer Rate: 100 Mbit/s
- Maximum Distance Supported: 3.11 Mile
- Fiber Optic Cable Standard:
- 50/125 µm
- 62.5/125 µm
- Ethernet Technology: Fast Ethernet
- Network Technology:
- 10/100Base-T
- 100Base-X
- Power Source: DC
- Form Factor:
- Compact
- DIN Rail Mountable
- Wall Mountable
- Desktop
- Height: 0.8″
- Width: 1.7″
- Depth: 4.1″
- Weight (Approximate): 4 oz
- Environmentally Friendly: Yes
- Environmental Certification:
- WEEE
- REACH
- RoHS
- Country of Origin: United States
- TAA Compliant: Yes
- Limited Warranty: Lifetime
Overview
The miniature miConverter 10/100 PoE/D is a rate-switching 10/100 RJ-45 copper to 100BASE-X fiber media converter that can be powered with Power over Ethernet (PoE) when connected to PoE switches and midspans. It can also be powered with DC power or AC power with an external power adapter. The miConverter 10/100 PoE/D miniature Ethernet media converters provide cost-effective copper-to-fiber connectivity solutions. Due to their size, portability, and low power consumption, they are ideal for fiber-to-the-desktop/ laptop under the desk deployments and mission-critical field diagnostic applications.
The miConverter 10/100 PoE/D features fixed fiber connectors and Small Form Pluggable (SFP) transceivers. ST, SC and LC fixed fiber connectors support multimode, single-mode, and single-mode single-fiber. 100BASE-X SFP transceivers enable adaptability to different fiber types and wavelengths, including Coarse Wave Division Multiplexing (CWDM) wavelengths to increase the bandwidth capacity of fiber infrastructure.
The RJ-45 port can auto-negotiate by detecting the speed and duplex-mode of the connected device. Upon connection to the UTP device, the RJ-45 port speed adjusts to either 10Mbps or 100Mbps, and the duplex-mode adjusts to either Full-Duplex or Half-Duplex. Auto-crossover enables the connection to workstations (MDI port) or hub/switches (MDI-X port) without requiring a crossover cable.
DIP-switches enable manual configuration of the RJ-45 port speed and duplex modes, and configuration of Link Modes (fault-detection capabilities) that enable in the identification and isolation of link failures.
Diagnostic data is provided through front-panel LED indicators that assist in network installation and maintenance. The LEDs display the availability of power, port activity, link status, and the speed and duplex modes of the RJ-45 port.
The miConverter 10/100 PoE/D features power redundancy with AC or DC external power options when used with PoE powering. AC power adapter is available in US, Universal and Country/Region specific models. Country/ Region specific models feature optional interchangeable connectors, allowing for compatibility with electrical outlet types found around the world. DC power up to 60VDC is available with a terminal connector option.
The miConverter 10/100 PoE/D is available with or without integrated mounting brackets. miConverter 10/100 PoE/D models without integrated mounting brackets can be installed in the miConverter 18-Module Powered Chassis.
Reviews
There are no reviews yet.